SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Ckaz21 on July 23, 2014, 09:09:04 PM
-
Running an eddy air gap on bbc wondering what kind of throttle bracket mount for the cable that people are using? Cant get butterflies to fully open on 850 dp when disconnected the cable will push up far enough but not when hooked up because it seems the angle of the bracket is wrong. It needs to be raised up higher but idk how id make it higher right now im using an intake manifold mount. Any suggestions? Thanks
Sent from my iPhone using SoCal Jet Boats
-
We could Make a bracket or look at mine and see if its got the same issue. Is there any way to re route the cable?? Hell ya brotherrrr
Sent from my SPH-L710 using SoCal Jet Boats mobile app
-
Most boats use a bracket that bolts under the carb, think of it as a 1/8" carb spacer. The have them at all the big catalog places like CP and Rex
-
Heres mine on top of a rpm with a 850dp
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi897.photobucket.com%2Falbums%2Fac178%2F2ndlight%2Fym957_zps63f2d830.jpg&hash=4d2e505e762775194c73bdb46979c5932f334714)