SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: bbfsouthwind on April 29, 2010, 03:52:32 PM
-
Just finished plumbing up my tunnel ram and carbs. I used 660 center squirter holleys setup by fuel curve engineering. Aeromotive 4 port regulator -10 inlet and return outlets reduced to -6 then to the bowls. Still trying to decide what type of air cleaner setup and carb linkage to run, any ideas? I was thinking velocity stacks
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi41.photobucket.com%2Falbums%2Fe289%2F88t-toplx%2FIMG_0024.jpg&hash=9bbfc4029aedd7ccba24753f5714fcbec593af83)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi41.photobucket.com%2Falbums%2Fe289%2F88t-toplx%2FIMG_0025.jpg&hash=e896363a11b2e3d3f85820c24d424738cab19ab6)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi41.photobucket.com%2Falbums%2Fe289%2F88t-toplx%2FIMG_0030-1.jpg&hash=9cba6425996dcc02a5ac031243c7a574095338a3)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi41.photobucket.com%2Falbums%2Fe289%2F88t-toplx%2FIMG_0032-1.jpg&hash=30a567ee8c071b2ef6ad17e89229cf3752a89076)
-
I've never seen center squirters like that, not to say they aren't out there, but the ones I've seen don't have the center hung float bowls. pretty cool carbs!
-
My old one!
[attachimg=#]
-
I'll play
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi483.photobucket.com%2Falbums%2Frr196%2F1980Nordic%2F2010-02-11164135.jpg&hash=d44cddd17eead164f05d82453788921f627b863d)
-
Me too ;D
[attachimg=1]
-
Me 3
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi673.photobucket.com%2Falbums%2Fvv95%2FIrrebel%2FMoo%2520build%2FP4110096.jpg&hash=b761af4131d4b49c80946ca367598162fa97637c)
Ray
-
Me four..
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.dynamicit-az.com%2FBoat%2FDSC02777.JPG&hash=75ec9e9a4d2d7c1a9089a37e51dc46946bbd01bb)
-
Wow , maybe we should just call this the bad ass ford thread!
-
i wanna play....
its a ford with a tunnel ram, but no fuel plumbing.....and it wasnt very bad ass. :thumbdown: just looked cool 8)
(https://www.socaljetboats.com/index.php?action=dlattach;topic=1453.0;attach=7168;image)
-
Only shot of the fuel lines I could find, lotta work done since then. Lines are kinda neet, looks like a regular Holley dual feed but has four lines
-
here's my carbless tunnel ram
-
here's my carbless tunnel ram
Please ditch the fram oil filter and go with a wix! Fram is by far the worst filter on the market!
-
Really, I did not know that. thanks for the heads up! Do you know if those magnets work that go around the oil filter, I was thinking about running one??
-
My brother was regional sales manager for Napa filters for over 15 years then was RSM for Purolator for twenty years. He's always said wix is the shit, who also make NAPA. I run a filter mag and cut the filter apart everytime, it will scare the shit out of you!
-
Here's mine
-
KICKASS
-
Damn those are some bad ass carb setups...love it :thumbup:
-
yesterday... Caution i have no idea what im doing
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi15.photobucket.com%2Falbums%2Fa376%2F00s-ten00%2Febb2160f.jpg&hash=74395712848dcf58143a15d713ce751c452ed32b)