SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: tmorgan on August 26, 2018, 03:46:46 PM
-
Recently put a used tunnel ram on my 460 with Holley 660 center squirters. I rebuild the carbs and set the jets back to stock. The problem I am having is I can’t get it to idle at all. I’ve set the mixture screws 1 1/2 turn out like Holley recommends and matched the throttles on both carbs 1 1/2 turns in but I still can’t get it to run. Any suggestions?
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Send me a PM with your contact I just went through this and may be able to help
Sent from my iPhone using SoCal Jet Boats