SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Rogers57x on April 04, 2020, 01:42:47 PM
-
so I am changing my intake edelbrock victor jr and 1000cfm AED , to a weiand tunnel ram set up with 2 AED750 carbs new motor is a 489 stroker solid roller reqtangelar alum headed 7500 rpm , old motor 468 flat tappet oval port hogged out oval port 6000 rpm limit are the carbs too small? getting lots of different info about staying with one carb but going comp jet racing and not drag racing any more, any thoughts would be cool thanks :banghead:
-
I have tunnel ram and 2x 750 dp carbs . Just got them done at C and J engineering. More than enough for ur displacement. Can send u the build spec on the carbs .
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)