SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: koby686 on June 01, 2016, 08:23:39 AM
-
Does anyone know where I can buy the baffels for these valve covers? The guy I bought them from must have taken them out and oil is spitting everywhere threw the breather with out the baffels. Or does anyone have or know of a alternative aftermarket baffle kit that will work with these valve covers.
Sent from my iPhone using SoCal Jet Boats
-
Ill check when I get home. Might have an extra set with screws for those valve covers.
-
Ah man if you do that would be awesome! My number is 818 620 4461 let me know if you do I'll send over money. Thank you!
Sent from my iPhone using SoCal Jet Boats
-
Well its a ford, so you should expect it to spit and drip oil from all over the place anyway😂😂😂😂
One fast station wagon!!!
-
Hahahaha, is that why there is a ford in your driveway 😂
Sent from my iPhone using SoCal Jet Boats
-
Sorry bud, found all eight screws but only could fricking find one baffle plate.
-
Make your own plate... thin piece of scrap metal from the local metal supply might be a buck. I made some stainless for my holley 460 covers for .50. Red lock tight... Are you running at least a 1/2+ qt low from max?
-
Make your own plate... thin piece of scrap metal from the local metal supply might be a buck. I made some stainless for my holley 460 covers for .50. Red lock tight... Are you running at least a 1/2+ qt low from max?
Was thinking the same thing. Ill even send you the one plate I have as a template you can use plus the screws.
-
Your mom, that was my plan if I could not find any. I'm running 6qts in a stock pan.
Ford lover that would be bad ass, would make it much easier!
Sent from my iPhone using SoCal Jet Boats
-
Your mom, that was my plan if I could not find any. I'm running 6qts in a stock pan.
Ford lover that would be bad ass, would make it much easier!
Sent from my iPhone using SoCal Jet Boats
Pm your address and Ill send it.
-
Yeah I have a ford in my driveway, but we don't take it on any long trips... Lol
One fast station wagon!!!
-
Fordlover Pm sent! Thank you!!!
Hahahah Josh you crack me up with your savageness
Sent from my iPhone using SoCal Jet Boats
-
Fordlover Pm sent! Thank you!!!
Hahahah Josh you crack me up with your savageness
Sent from my iPhone using SoCal Jet Boats
Got it! Ill send it out this week! 👍
-
I love all three of my Ford's
-
Got some material and made them out of aluminum. Anyone else who has these covers are your holes Inside tapped? These ones are not I wonder if the guy before didn't know how to tap it and is why they are not in. Anyways got it all dialed in. Thank you ford lover for the offer of sending yours but I got it all sorted!
Sent from my iPhone using SoCal Jet Boats
-
That looks kick ass! Good job!
-
Came out solid 👌🏽
Sent from my iPhone using SoCal Jet Boats
-
So your running 6qts in a 6qt pan? If so take 1/2qt out. If you have a stock dip stick, keep the reading roughly in the middle. I'd consider getting a 10qt pan an run 9. If you have over trans headers you could install a evap or puke tank.
-
Fordlover Pm sent! Thank you!!!
Hahahah Josh you crack me up with your savageness
Sent from my iPhone using SoCal Jet Boats
SAVAGES
One fast station wagon!!!
-
So your running 6qts in a 6qt pan? If so take 1/2qt out. If you have a stock dip stick, keep the reading roughly in the middle. I'd consider getting a 10qt pan an run 9. If you have over trans headers you could install a evap or puke tank.
Yea, I am running the stock pan with the full amount of oil. I want to get a 10qt I just have to measure the clearance it's pretty tite in There. I bought a puke tank it came in and it's way to small. With the baffels in no oil comes out of the valve covers anymore. I went for a quick test this after noon not a drop of oil came out.
Sent from my iPhone using SoCal Jet Boats