Null


1972Challenger

  • Karma: +1/-0
vaulve covers
« on: October 21, 2010, 07:38:17 pm »
so im looking to replace my covers for somthing alittle shinnier... but i know i need more then just the cover... i know i need a breather... but do i need one for both sides of the motor?? and then i know i need an oil cap.. soo what all do i need exactly???
  • Boat #1: 1972 Challenger bubble deck
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

HDriderTH

  • Karma: +12/-0
Re: vaulve covers
« Reply #1 on: October 21, 2010, 07:41:19 pm »
What kind of motor and what kind of breathing system do you have now?
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

'82 Sanger Bubble deck, Blown 454....V-drive

TJS Nordic

  • Karma: +2/-0
Re: vaulve covers
« Reply #2 on: October 22, 2010, 06:06:42 pm »
If they are aluminum a company called Pro-werks makes weld in oil fill cap bungs and a bunch of other stuff. My valve covers had no holes at all. I cut the holes needed and welded the oil fill cap bung from the inside of the valve cover for a cleaner look.
here is the site:
http://secure.chassisshop.com/partlist/6050/

T.J.

1972Challenger

  • Karma: +1/-0
Re: vaulve covers
« Reply #3 on: October 23, 2010, 10:12:46 am »
i have covers that say holly, ford on them... the motor is a BBF 390.. and the breathing systm is wierd.. on the covers there is only one hole on the back side of them... on each cover...then behind the carb there is a peice where 2 hoses come from... the piece has a little air filter on it and the hoses go to each valve cover
  • Boat #1: 1972 Challenger bubble deck
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

Nixonnow

  • Karma: +4/-0
Re: vaulve covers
« Reply #4 on: October 23, 2010, 11:31:27 am »
Pics?
  • Boat #1: 1974 Hallett Bubbledeck
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
What's a Goodtime Cost?

 


Null

SMFPacks CMS 1.0.3 © 2023