SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: 1972Challenger on October 21, 2010, 07:38:17 PM
-
so im looking to replace my covers for somthing alittle shinnier... but i know i need more then just the cover... i know i need a breather... but do i need one for both sides of the motor?? and then i know i need an oil cap.. soo what all do i need exactly???
-
What kind of motor and what kind of breathing system do you have now?
-
If they are aluminum a company called Pro-werks makes weld in oil fill cap bungs and a bunch of other stuff. My valve covers had no holes at all. I cut the holes needed and welded the oil fill cap bung from the inside of the valve cover for a cleaner look.
here is the site:
http://secure.chassisshop.com/partlist/6050/ (http://secure.chassisshop.com/partlist/6050/)
T.J.
-
i have covers that say holly, ford on them... the motor is a BBF 390.. and the breathing systm is wierd.. on the covers there is only one hole on the back side of them... on each cover...then behind the carb there is a peice where 2 hoses come from... the piece has a little air filter on it and the hoses go to each valve cover
-
Pics?