SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: chaosmotox on March 06, 2013, 05:56:38 PM
-
Just had the stock heads rebuilt what oil should I run. Don't know what the guy ran in it before. Before and after pics in the motor are posted.
-
I run 20/50 val racing in my ford. 10qt pan
-
X2
-
I've got a bbc but the owner before me was running 10-40 castrol so I've continued to run the same
1995 advantage
-
I run the Valvoline racing in my 460 also, plus a zinc additive too
-
I run 20/50 val racing in my ford. 10qt pan
Same here
-
I'm still running Chevron Delo 400 15W40 diesel oil in my engine because of the zink.
No matter what you choose you want to make sure you are getting an oil that still contains zink unless you are running a roller cam.
Diesel oils (Delo, Delvac...) and racing oils (Valvoline VR, Kendall, Torco, Royal Purple, Joe Gibbs...) are going to be your best bet. I mainly recommend using something that you can purchase local to you easily. It's a pain in the A$$ if you have to mail order another case of oil just to top off before you use your boat again. :banghead:
-
Delo 400 15/40, x3 boats :thumbup:
Daniel
-
Thanks you guys for the help.
-
joe gibbs hotrod 10w30 in my 460
-
Chevron Delo 400 is the Shit
I may actually be here as we speak in Richmond Ca where it is made but thats another story (about 90 percent of the bottle of oil you buy is made here in Richmond then whatever additive say Castrol wants to add is added and put in thier bottle. Mobile makes excellent BASE lube oil also and if it wasnt made here they made it
That being said go with any of the listed above from other posts. I run the Valvoline Racing Just make sure whatever u get has the Zink. Thanx to our Gov some oils dont have it anymore
Or spend alot of dough and buy a roller cam and lifter set up
-
Delo 400 15/40, x5 boats :thumbup: :thumbup: