SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: challenger on June 03, 2009, 06:29:42 PM
-
is this the norm to have a little milk on the top of the valve cover and one spot on the dip stick about 3 inches up form the full mark only about 1/4 of ship the oil looks good on the bottom of stick did oil change looks good runs good 460 iam new to this anything helps thanks
-
I'd probably change my oil at a minimum. I guess it could be condensation, especially if it's the 1st time out all year. If you have injected headers, it could be from them if there getting wet too soon in the rpm range. I'd keep em dry under 2k.
-
what do i need to do? one side is getting wet at idle a little "so there sould be no milk at all ."
-
Do you have a bassett valve???(or similar)
-
FWIW, when you drain your oil if you put it in a milk jug after a while water will separate and you can see just how much water you have in there.....