no gauges

« **on:** June 27, 2009, 11:36:03 AM »

Hey guys,
I've been laid up for a month or so with my back and now I'm trying to get the boat ready. I had the seats redone and we installed them but now I have no power to the gauges, No tach volts oil or anything. The blower and buldge work but nothing else. Nothing else was done. Any thoughts on where to start looking? Thanks I'm not to good with electrical but I can follow wires. Heres a pic of the motor. I have checked the grounds.

Marty

« **Reply #1 on:** June 27, 2009, 12:49:34 PM »

Check the terminal block and make sure your connections are still good. If thats not it you need to start tracing your wires and checking for damage.

You could always just take the day and replace your 30+ year old wiring harness!

« **Reply #2 on:** June 27, 2009, 01:06:20 PM »

I would check the power supply behind the dash, atleast that has been a problem for me before in the past.

good luck with it

« **Reply #3 on:** June 27, 2009, 02:56:57 PM »

found the problem. a splice in the wire was loose..... Cks good. thanks for the replies....

« **Reply #4 on:** June 27, 2009, 03:00:12 PM »

Quote from: OC2Vegas on June 27, 2009, 12:49:34 PM

You could always just take the day and replace your 30+ year old wiring harness!

Still stand by my previous suggestion! If one is damaged....

marty722

no gauges

OC2Vegas

Re: no gauges

2savage4you

Re: no gauges

marty722

Re: no gauges

OC2Vegas

Re: no gauges