SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Thedogkeeper on September 22, 2015, 03:48:21 PM

Title: Winterizing
Post by: Thedogkeeper on September 22, 2015, 03:48:21 PM

Could I please get advice on how to winterize my 460 jet?  I posted the question on Performance boats also and did get one good reply.  Just getting ideas to make it foolproof.

Title: Re: Winterizing
Post by: BCouey on September 22, 2015, 03:52:28 PM

If it's a roller cam, back the rocker arm nuts off so none of your valves are open. Much better on your springs! That and the sta-bil in the tanks, unhook battery etc


Sent from my iPhone using SoCal Jet Boats

Title: Re: Winterizing
Post by: mash on it on September 22, 2015, 05:05:50 PM

Drain the block at the petcocks or plugs above the oil pan rail, x2
unhook lower hose on logs, x2
Might want to oil fog the motor, too

Dan'l

Title: Re: Winterizing
Post by: Thedogkeeper on September 23, 2015, 04:08:44 PM

Thanks