SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: River Dad on January 16, 2008, 01:35:16 PM
-
need to sell ASAP for another project. I'll get up pics as soon as I can.
One is a mark IV 4 bolt main .060 over (468). 12:1 compression ratio with domed pistons. Not sure on the bottom end as it comes with a 10 qt pan that is still on. Complete long block with hyd cam, older Edelbrock polished t-ram with single Holley 650 douple pumper, dist, and log exaust. Motor was built by GS Marine for a flat. I'll try to get more info from the guy that I bought it off of. $1400 Come get it.
Second one is another mystery. I know it's a 2-bolt main Mark IV. The pistons are flat top and appear to be forged. The bottom end is very nice. Eagle H-beam rods with ARP bolts and a crank that is std/std. I can't tell if it's forged or what, I don't see any casting marks at all, its smooth. Maybe a billet? I'll get some pics up and see what you all think it is. the block is .020 and could be cleaned up with a min hone. Long block includes square port heads. $1500
Call me if you're interested, first come, first serve........... Jason 951-675-9249
-
Let see some pics
-
Left you a message at ur #
-
Checked with the previous owner and the motor was built by a friend of his, not GS Marine. The boat was done at GS. Here's a shot of the domes.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2FIMG_0440.jpg&hash=cde36bce6fa2b356584c31c027a4ebddbe305e4a)
Can anybody tell what type of crank this is?
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2FIMG_0438.jpg&hash=d707c22b5daa0ad09f3fd88315b355a3a3016c44)
It has some nice flat top pistons (.020)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2FIMG_0439.jpg&hash=51d82dac2975397a6d65159da048f0fd489681d4)
-
Damn wish I was closer to ya!!! >:(
-
Need better pic. maybe a Eagle crank
-
Can anybody tell what type of crank this is?
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2FIMG_0438.jpg&hash=d707c22b5daa0ad09f3fd88315b355a3a3016c44)
It has some nice flat top pistons (.020)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2FIMG_0439.jpg&hash=51d82dac2975397a6d65159da048f0fd489681d4)
Looks like an Eagle?
-
I think you're right Busby, Looks real similar to the Eagle crank I put in my old CP. Still for sale, would make a great foundation for a pump gas project. Busby, any luck on your boat? That's a great deal, I'm sure it won't last long
-
OK, new deal on the 468 ;D ;D ;D Complete 4 bolt 468. dome pistons, 10/10 crank, HD rods with 7/16 bolts. double springs, roller rockers, brand new Edelbrock manifold, holley double pumper, Edelbrock fuel pump, brand new starter, Mallory unilite, chrome valve covers, 10 qt jet boat pan. Bearings look ok, could use a freshening up, but a great deal for the price.... $1300 complete
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2Fnovember2007001-1.jpg&hash=3f0a071224818b89dd09d7179c01216baab4596c)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi20.photobucket.com%2Falbums%2Fb204%2Frousefamily4%2Fnovember%25202007%2Fnovember2007003-1.jpg&hash=af89aa358e93b62a53ef284352562ef2f59f50ec)
-
i Will buy it if you bring it out to Bullhead ;D
Can't hurt to ask
2sav
-
Damn that's a Smokin' deal!
-
Damn that's a Smokin' deal!
Yeah it is, it would look really good in my boat and save me a head ache too ;D
2sav
-
Need better pic. maybe a Eagle crank
I think so ;)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi223.photobucket.com%2Falbums%2Fdd269%2F2savage4you%2F001-15.jpg&hash=7035f0761e49119b117d4886098295c5313baec7)
2sav ::)
-
Will you bring it out to Bullhead ;D
Can't hurt to ask
2sav
dont be lazy...drive the 3 hours and go get it.
-
OK, new deal on the 468 ;D ;D ;D Complete 4 bolt 468. dome pistons, 10/10 crank, HD rods with 7/16 bolts. double springs, roller rockers, brand new Edelbrock manifold, holley double pumper, Edelbrock fuel pump, brand new starter, Mallory unilite, chrome valve covers, 10 qt jet boat pan. Bearings look ok, could use a freshening up, but a great deal for the price.... $1300 complete
Will you take payments, I could have it paid off in less than 2 years. :P :-[ J/K
Smokin deal!!
-
dont be lazy...drive the 3 hours and go get it.
Yeah i know. but with five kids it's alittle hard to get away like that.
I guess i could always tell the ol'lady im going for bread and milk ;D
2sav
-
2sav, send him a check, I'll pick it up and bring it to you the next time I'm in Bullhead ;D
It was only 18 years between the last two time I was there >:D
-
Well if this work's out and i do pick me up a Chebby ;D
I got alot of ford stuff to sell ;)
2sav
-
Hey, I'm always looking for an excuse to go to the river!!!!!! Good luck with it 2sav, I'm sure you will post more pics of the build. Seems to me like the deal on the Ford parts aint half bad either.......
-
Looking forward to meeting you on saturday , Yeah i will be posting pics for sure
Thanks again for a great deal ;)
2sav
-
Need a quad? I'll trade you. 250cc, 2 stroke or 4 stroke. This is killing me (being a broke asss). :'( :'( :'( ;D
-
hot rod, give me a call, maybe we can work something out..... Jason 951-675-9249
Nice meeting you Steve, good luck with the project!!!!!!
-
hot rod, give me a call, maybe we can work something out..... Jason 951-675-9249
Nice meeting you Steve, good luck with the project!!!!!!
Will do, tomorrow. I just want to say that I think it was awesome what you did for Wanabe and 2Sav, real nice of you. :)
-
It's kind of difficult for me to tell, but it looks like you've got a lot of what I want. I called and left a message. I'd like to get your forgded flat tops, H-beams, a stronger than stock cast 454 crank. I'd like a set of rect port heads but it isn't req'd for my ap..
I've got a 454 2bolt block, one cylinder needs sleeving, 6 B.S. cast rods, 6 domed hyperwhatever pistons - as far as 454's go - it's a bunch of crap. :P If I could get a strong rotating ass w/flat tops in a block that's right for the pistons I'm way further ahead.
I have a oil pan and 049 oval heads and a few other misc. to finish it off (minus intake system which I'm going to get in a month or two).
-
hot rod, give me a call, maybe we can work something out..... Jason 951-675-9249
Nice meeting you Steve, good luck with the project!!!!!!
Hey Jason , nice meeting you to, and thanks again for all you did and all the goodies you brought me.
You just put my project to about the 75% done level. ;D Thanks again.
2sav
-
PM sent
-
Is the 468 still around?
-
Not that one, it was a nightmare, but i got others. Give me a call if you need something. Jason 951-675-9249
-
, but i got others. Give me a call if you need something. Jason 951-675-9249
Yes you do ! Buy the shit people . Some top notch shit ready to go real cheap too ! Damnit ! I wish I had more money ...... :-\
-beerjet-
-
one step ahead of you Omar....
-
Thanks Jason for the great deal. I will post pics up this weekend.
-
Do you have any of the motors still for sale?
-
I have a 454 complete with pan, polished manifold, polished exuast, carb, mallory ign, etc. It came out of a running boat 2 months ago after we swapped in a 468 4 bolt. Turns over nice and smooth and had 60 lbs oil pressure. I didn't build it, just removed it... I'll get the casting #'s for ya and post some pics. Jason
-
is the number that is on the thread a good number to reach you at?