SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: Ema Non-Performance Marine - BANNED on November 11, 2007, 04:45:46 PM
-
D8TE Truck 460
This engine is complete air cleaner to pan.
Pulled from a '78 F250.
Block is a D1VE
Heads are D3VE
$400 / sold !!!
D3VE heads complete
I also have a set of complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35
-
Is this the one you just got?
2sav
-
yep :o
I will be selling everything being I am building a family boat engine and not racing ever again.
-
yep :o
If its already out, why dont i take that one?
is it a good block/heads
I dont know what the Dvkcwoi whatever means
2sav
-
Cash talks BS walks as Brad says.
I will be put on Craigs list and ebay at the end of the day tuesday.
-
Cash talks BS walks as Brad says.
I will be put on Craigs list and ebay at the end of the day tuesday.
Sounds great, good luck with your sale ;D
2sav
-
yep :o
I will be selling everything being I am building a family boat engine and not racing ever again.
why no racing ever agian ?
-
D8TE Truck 460
This engine is complete air cleaner to pan.
Pulled from a '78 F250.
Block is a D1VE
Heads are D3VE
$400
D3VE heads complete
I also have a set of complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35
This is deja vu ::)
Too funny!
2sav
-
This is deja vu ::)
Too funny! ???
2sav
-
D8TE Truck 460
This engine is complete air cleaner to pan.
Pulled from a '78 F250.
Block is a D1VE
Heads are D3VE
$400 / sale pending
D3VE heads complete
I also have a set of complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35
:o
-
D3VE heads complete
I also have a set of complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35
-
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Is it still available?
2sav
-
man. Place diverter, old style
$375
12jb pump, complete suction housing
$350
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175
BBF 4pt rear mount with feet, clear powdercoated
$250
-
A few pics
-
diverter
-
No offence Jim..that motor looks like it came from the bottom of Havasu. Does it run?
-
No offence Jim..that motor looks like it came from the bottom of Havasu. Does it run?
Fuck if I know ??? But that is why it is $175
-
hows the bowl on the pump, split?
-
hows the bowl on the pump, split?
i think hes only selling the suction housing
-
hows the bowl on the pump, split?
i think hes only selling the suction housing
Brad is correct, the edit button is gone. Bowl is spoken for. I will have a converted C avalable real soon. That will be a half inch longer than mine is with more taper on the inside.
-
Complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150 Sale Pending
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35 Sale Pending
man. Place diverter, old style
$375
12jb pump, complete suction housing
$350 Sale Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175
BBF 4pt rear mount with feet, clear powdercoated
$250 Sold
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks.(pair)
$150
D3VE heads with valves only (pair)
$125
D3VE heads take-offs (pair)
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Comp Cams Magnum Roller Rockers
$100
Crane Cams Rocker Arm Guideplate Conversion Kit
$75
800 cfm DP, it needs to be gone through as it has been sitting for some time now.
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
Cast Iron CJ intake
$35
Man. Place diverter, old style w/low reverse nozzel (Modified for higher roost)
$375
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175 / OBO
18' white jet boat bare hull with papers (no trailer)
$100 / OBO
(Prices above do not include shipping costs)
-
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175 / OBO
'77 18' white jet boat bare hull with papers (no trailer)
$100 / OBO
Well I was looking at the new Hot Boat Mag today, skimming threw and saw a boat that was identical to this boat. It seems it is a copy of a Wright.
The hin # starts with JXM.
I am really just wanting this to go. I have enough shit here I don't need it sitting around much longer. The 455 is still in it with all the marine equiptment still on it.
Package deal !!! ::)
-
Complete D3VE head but need a valve job, they have new springs, retainers and locks.
$150
D3VE heads with valves only
$125
D3VE take-offs
$75
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Berkeley 3pt top mount or standard Starter Bellhousing w/starter
$100
Waterpump Block-off
$25
Thermostate housing
$10
man. Place diverter, old style
$375
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175
18' white jet boat bare hull with papers (no trailer)
$100 / OBO
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$150 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$150 a pair
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Sale Pending
800 cfm DP, it needs to be gone through as it has been sitting for some time now
$150 Sale Pending
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$35
Sale Pending
Manual Place diverter, old style w/low reverse nozzel (Modified for higher roost)
$375 Sale Pending
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
$ 175 / OBO
http://www.socaljetboats.com/index.php/topic,1979.0.html
18' white jet boat bare hull with papers (no trailer)
$100 / OBO
Package Deal $150 for both
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$150 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$150 a pair
Edelbrock Performer 460
$150
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Sale Pending
800 cfm DP, it needs to be gone through as it has been sitting for some time now
$150 Sale Pending
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$35
Sale Pending
Manual Place diverter, old style w/low reverse nozzel (Modified for higher roost)
$375 Sale Pending
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html
18' white jet boat bare hull w/o papers (no trailer)
Package Deal $100 for both
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$150 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$150 a pair
Edelbrock Performer 460
$150
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$35
Sale Pending
Manual Place diverter, old style w/low reverse nozzel (Modified for higher roost)
$375 Sale Pending
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html
18' white jet boat bare hull w/o papers (no trailer)
Package Deal $100 for both
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$150 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$150 a pair
Edelbrock Performer 460
$150
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$150
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$35
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html (http://www.socaljetboats.com/index.php/topic,1979.0.html)
18' white jet boat bare hull w/o papers (no trailer)
Package Deal $100 for both
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$125 a pair
Edelbrock Performer 460
$100
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$80
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$25
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM. They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps. These tires have very little use maybe 5 miles. Been sittin for about a year. Still in excellent shape. This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html
18' white jet boat bare hull w/o papers (no trailer)
Package Deal $50 for both/obo
I have 4 315/75R16 BFG Baja TAs that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps. They are almost new and have about 15 miles on them. These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !
-
hey jim do u still have the 35s bfgs ?
-
hey jim do u still have the 35s bfgs ?
Yes these are in great shape. Never used off-road, they where used just for loading on trailer. They are a little narrower than the Baja TAs, just enough to fit the big Ford on the U-Haul trailer to take to races.
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$125 a pair
Edelbrock Performer 460
$100
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$80
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$25
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale Pending
I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM. They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps. These tires have very little use maybe 5 miles. Been sittin for about a year. Still in excellent shape. This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires
Pick-up Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html
18' white jet boat bare hull w/o papers (no trailer)
$Free$/obo
I have 4 315/75R16 BFG Baja TAs (35') that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps. They are almost new and have about 15 miles on them. These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$125 a pair
Edelbrock Performer 460
$100
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$80
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$25
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale Pending
I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM. They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps. These tires have very little use maybe 5 miles. Been sittin for about a year. Still in excellent shape. This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires
Pick-up Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html (http://www.socaljetboats.com/index.php/topic,1979.0.html)
Engine is on a cart waiting for someone to pick it up ! 8)
18' white jet boat bare hull w/o papers (no trailer)
$Free$/obo
Boat is gone cut to pieces and in the bed of my truck ! :D
I have 4 315/75R16 BFG Baja TAs (35") that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps. They are almost new and have about 15 miles on them. These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$125 a pair
Edelbrock Performer 460
$100
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$80
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$25
Berkeley 12JG bowl (split bowl)
$350
American Turbine Suction Housing AT-309
(needs small repair)
$225
AT impeller shaft (with all HP bearing kit parts/needs new bearing)
$200
AT impeller shaft
$150
Sale Pending
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
Sale Pending
I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM. They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps. These tires have very little use maybe 5 miles. Been sittin for about a year. Still in excellent shape. This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires
Pick-up Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html (http://www.socaljetboats.com/index.php/topic,1979.0.html)
Engine is on a cart waiting for someone to pick it up !
18' white jet boat bare hull w/o papers (no trailer)
$Free$/obo
Boat is gone cut to pieces and in the bed of my truck ! :D
I have 4 315/75R16 BFG Baja TAs (35") that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps. They are almost new and have about 15 miles on them. These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !
-
D3VE heads complete, but need a valve job, they have new springs, retainers and locks
$125 a pair
D3VE heads (unmarked version) nice clean stock take offs very low hrs.
$125 a pair
Edelbrock Performer 460
$100
A set of new Comp Cams 926-16 valve springs in box, 109 on the seat
$80
Waterpump Block-off
$25
Thermostat Housing
$10
Cast Iron CJ intake
$25
Berkeley 12JG bowl (split bowl)
$350
American Turbine Suction Housing AT-309
(just housing/needs small repair)
$225
AT impeller shaft (with all HP bearing kit parts/needs new bearing)
$200
AT impeller shaft
$150
12jb pump, complete suction housing (w/impeller & shaft)
$450
Berkeley 12JB bowl (split bowl)
$350
I have a set of 4, 35x12.5R15/C BFG Mud-Terrain KM. They are mounted on a set of 15x10 5 on 5.5" bolt pattern Eagle 1069s, 1/2 ton Ford and Dodge as well as the CJ jeeps. These tires have very little use maybe 5 miles. Been sittin for about a year. Still in excellent shape. This tire & wheel combo NIB is $1252 + state and FET tax.
$1000 wheels & tires or $600 for just tires
Pick-up Pending
K headed 455 olds with 3pt mounts and exhaust manifolds and risers
http://www.socaljetboats.com/index.php/topic,1979.0.html (http://www.socaljetboats.com/index.php/topic,1979.0.html)
Engine is on a cart waiting for someone to pick it up !
18' white jet boat bare hull w/o papers (no trailer)
Boat is cut up into pieces and in my pick-up ! :D
I have 4 315/75R16 BFG Baja TAs (35") that are just sitting they are on ProComp Extreme Alloy wheels 16" x 9.75" with a 5 on 5.5" bolt pattern, 1/2 ton Ford and Dodge as well as the CJ jeeps. They are almost new and have about 15 miles on them. These have the bead lock ring and only three are blue the other is black.
$2000 tires & wheels or $1500 just tires
Prices above do not include shipping costs, No reasonable offer refused !