SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: River Dad on February 25, 2011, 10:15:34 AM

Title: 454 Gen V motor
Post by: River Dad on February 25, 2011, 10:15:34 AM

Chevy 454, Gen V jet boat engine. 4-bolt main, hydraulic cam, stock compression, aluminum intake manifold and chrome valve covers. $1100.

Title: Re: 454 Gen V motor
Post by: fast fredy on February 26, 2011, 08:10:42 AM

Whats the history on this bad boy,hours on the motor and what comes with it?Where is it located also?Does it have rectangular ports and is valve train there, lifters push rods springs with valves and roller rockers?Please give me the hole breakdown on lower end also,im very interested!!!!

Title: Re: 454 Gen V motor
Post by: River Dad on February 27, 2011, 07:59:52 AM

The motor is complete and only needs a fresh carb. It came out of a boat with unknown hours. I put on the aluminum manifold with new Felpro gaskets, and the valve train all looked good but they are stock rockers. As I recall, they were oval port heads. I haven't even had the oil pan off.  It's in my shop in Lake Elsinore. It's on my test stand and we can make it run if your interested. 951-675-9249. Jason

Title: Re: 454 Gen V motor
Post by: rush2112 on February 27, 2011, 06:15:42 PM

I would be interested if the heads are not smallport (peanut port)I have found a ton of bbc with the pp heads....I have almost all my parts except motor.....all I have found has been truck motors....

 :banghead:

Title: Re: 454 Gen V motor
Post by: 502 SPECIAL on April 06, 2011, 04:02:15 PM

you still have that motor?my cousin would be all over this! :thumbup: