SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: 2savage4you on October 24, 2007, 11:39:17 AM
-
im just looking to see if any one is interested in a 455 block thats .40 over with restricters installed and new cam bearings fresh set of "ka" heads a Nodular crank of course i have the pistons to go with the block already pressed on rods. Edelbrock Torker intake, engine mounts, Dooley 10qt oil pan, a freshley rebuilt 455 starter and so on. this engine is ready to be put together all machine work is done.
I know im probably wasting my time but as you know you guy's get first dibbs then its off to ebay if i decide to go with a different engine.
I know it sounds funny but im looking to see how hard it will be to unload all this to help fund the start over motor ;D
I can post pics if you want.
2sav
-
Ok here's some pics of stuff thats for sale ;D
2sav
-
;D
2sav
-
I might be interested in the short block, maybe more. Do you have cam or valve train?
-
I might be interested in the short block, maybe more. Do you have cam or valve train?
No i dont have a cam or lifters, but i do have the rockers,pushrods and a fresh set of heads ;D
I do have a old cam that came out of another 455
2sav
-
Kudo's for offering. BTW, I've heard from other's on this site that the rocker arm pivots ??? are hard to find. ;)
-
Kudo's for offering. BTW, I've heard from other's on this site that the rocker arm pivots ??? are hard to find. ;)
I think i have enough for atleast 2 sets of heads
2sav
-
Ok guy's last call before it go's to Ebay ;D
Need to start funding the engine swap 455 to a 460 Woooo Hooooooooo :D
I also have five kids, for the right price :o
2sav
-
My interest level will be based inversely on your pricing level. Sooooo whatcha thinkin' that short block is worth. I don't need the pan or the starter. PM me if you like. Thanks
-
What you take for the pan?
-
Kudo's for offering. BTW, I've heard from other's on this site that the rocker arm pivots ??? are hard to find. ;)
Aluminum ones are plentiful. The steel ones are a little harder to find.
-
Aluminum ones are plentiful. The steel ones are a little harder to find.
I have both ;D
and you have a pm
2sav
-
I have both ;D
and you have a pm
2sav
Yeah, me too. I may have to put some into the aluminum scrap, just to reduce the number of boxes of parts! ::) I just hauled 4 cranks, 6 heads, an extra block, and a bunch of pump parts to the basement, so I have a little room in the garage to start building next year's engine. Sent you a PM reply.
-
Just a little bump for the olds stuff ;D
455 short block sold pending buyers ok i will take it ??? sold
Still have
Bassetts $250 sale pending Ebay, one more day to go ;D
Dooley oil pan $100 obo Sold ;D
fresh Ka heads $200 sold
Engine mounts $75 each sold
Flywheel sold
pto sold
And 5 children free if you pick up ;D need the room for new engine, thats my story >:D still available
2sav
-
Just a little bump for the olds stuff ;D
455 short block sold pending buyers ok i will take it ??? Looks like Buyer has lost interest so its all going to Ebay ???
Still have
Bassetts $250
Dooley oil pan $100 obo
fresh Ka heads $200
Engine mounts $100 each
Flywheel $30
pto $20
Block with new cam bearings/freeze plugs/0.40 over $200
Nodular crank $150
new 0.40 over pistons pressed on rods $125
Edelbrock Torker intake $80
All prices do not include shipping ;) lets see what Ebay does
2sav
-
Forgot i have a water pump plate and distributer/aternator ;D
2sav
-
Dooley 10qt oil pan is sold ;D
2sav
-
Its gone all of it SOLD SOLD SOLD :o ;D WOOO HOOOOOOOOO >:D
Its a good day to drink some beeeeers ;)
2sav
-
Nice ! Now get your ass over here and start the BBQ !