SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: Jetaholic on January 10, 2007, 12:44:20 PM

Title: 455 Olds For Sale
Post by: Jetaholic on January 10, 2007, 12:44:20 PM

455 Olds pre-assembled long block...decided to go with a BBC.

Motor specs:

L2390F TRW Pistons
Stock Rods/Crank
Punched .030 over
"J" Heads modified with larger intake valves
W-30 Spec Cam:
.244/244 (Int/Exh) .050 duration
.475 Valve Lift w/1.6 Rocker Ratio
Roller Tip Rockers w/adjustable pre-load
Double Roller Chain
Melling F22HV High Volume Oil Pump
Restricted Cam Bearings
Restricted Push Rods
Hardin Marine 10qt oil pan
Brass freeze plugs

Asking $2500 obo

Call if interested.

Home: (559)292-6274
Cell: (559)994-6488

Jon

Title: Re: 455 Olds For Sale
Post by: beerjet on January 17, 2007, 07:11:20 PM

I didnt know anchors were this expensive . WOW  :o  :D

-beerjet-

Title: Re: 455 Olds For Sale
Post by: hotrod56cars on January 17, 2007, 07:59:20 PM

Ouch  :'(

Title: Re: 455 Olds For Sale
Post by: rooster562 on June 26, 2007, 11:06:16 PM

hot rod is harsh on the 455's!! i've had two in two different boats they've done me no wrong, but they have'nt won me too many drags!!! run AA inpels to keep there rpm down & run wide open then. good on gas, poor on ass?!!!!

Title: Re: 455 Olds For Sale
Post by: hotrod56cars on June 27, 2007, 12:20:53 AM

The more I've read of owners of 455's posts the less harsh I've gotten on them. You want the RPM's below 4500, you want to make the oil return faster to the oil pan than stock, and you want the biggest oil pan you can get on them. I'm the owner of a 455 as a matter of fact and I'll let you all know what I think about it when it gets in the water. Besides Beerjet is the a-hole here, I'm just the thread jacker.

Quote from: beerjet on January 17, 2007, 07:11:20 PM

I didnt know anchors were this expensive . WOW  :o  :D

-beerjet-

Does anyone know where I can get some wheels for my Chevelle, I'm looking for some old Cragar SS's.   ;D

Title: Re: 455 Olds For Sale
Post by: CHROMEY on June 27, 2007, 08:49:32 AM

Quote

Besides Beerjet is the a-hole here, I'm just the thread jacker.

WOW take it easy boys

Title: Re: 455 Olds For Sale
Post by: 2savage4you on July 04, 2007, 02:20:39 PM

Quote from: Jetaholic on January 10, 2007, 12:44:20 PM

455 Olds pre-assembled long block...decided to go with a BBC.

Motor specs:

L2390F TRW Pistons
Stock Rods/Crank
Punched .030 over
"J" Heads modified with larger intake valves
W-30 Spec Cam:
.244/244 (Int/Exh) .050 duration
.475 Valve Lift w/1.6 Rocker Ratio
Roller Tip Rockers w/adjustable pre-load
Double Roller Chain
Melling F22HV High Volume Oil Pump
Restricted Cam Bearings
Restricted Push Rods
Hardin Marine 10qt oil pan
Brass freeze plugs

Asking $2500 obo

Call if interested.



 Where are you located ? i just blew mine need a quick replacement motor. Thanks.



2sav