SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: 88CARRERA on December 03, 2012, 08:28:10 AM
-
anyone have a good 460 block laying around?
chris
-
I've got an early 90's vintage Kodiak Marine 460. According to Paul Kline/AKA Lakes Only/High Flow Dynamics, this is a very desirable 460 with factory forged pistons, CJ intake/rods/cam, a true 9:1 compression. I bought it on a pallet as a "runner" although I never got to check that out. I pulled the heads/intake to look at the bores and all looks good. Heads need bolted back on and it needs a carb but otherwise complete with alum center riser Kodiak exhaust (have been welded/repaired). Heads are E6TE-DA and block D9TE-AB. I bought it with the intention of doing a light overhaul and sending it to Alaska for my work skiff but then found out it was too wide to go under my engine cover and the shipping was way too much money! $700.00/offer. In Chico CA, 100 miles north of Sacto, Lance 530-864-4846
-
anyone have a good 460 block laying around?
chris
I've got 2 Chris. Both .030 over, both been run, one has a season on it, one for only about 20 minutes (Moo's original block, spun a rod bearing). Hone marks still look fresh. Pull all the plugs, clean 'em, put 'em together and go! ;)
Ray
-
I have a d1ve block dont know the crank is bad in it but i think the block is good but its free if you want it if you do want it cal me at 208 447 8443 i just wan.t it out of the garage