HARDCORE BBC 4 bolt main stroker engine 496ci, combination is a Hyd Roller cam set up and designed to run on pump gas fuel

HERE IS YOU TUBE LINK TO THE DYNO

This engine has been professionally built buy us at Hardcore, we have 40 years experience in Hi performance street engines that run on 91oct gas to outright 6 second racing engines that make 3000+HP

This engine was designed for a boat and was built with longevity in mind using the best parts for the budget we had in mind at $8750

Here is the build list for the engine

Block GM GenV
Block was cleaned and magged, mail line checked, bored and hones to 4.310 with a torque plate, block was then square decked

Crank Eagle cast steel 4.250 stroke
Rods Scat forged I beam with ARP 8740 cap screws
Pistons Racetec forged 4032 with 20cc dome
Rings Total Seal plasma moly 1.5mm 1.5mm 3mm
Damper Pro Street 8" with Milodon bolt
Cam Comp Cams Custom Hyd Roller
Lifters Lunati Hyd Roller
Timing Set Comp Cams billet dual roller with torrington thrust bearing
Oil pump Melling M77HV with HD drive
Oil pan Milodon 6QT with pick up
Push rods Lunati 3/8 chrome moly
Heads Hardcore custom built with SI valves and Lunati spring kit
Rockers Scorpion Alum 1.7 ratio
Intake Edelbrock Victor JR
Carb 950 Holley Ultra HP
Distributor MSD ready to run, comes with coil wiring and bracket
Wires MSD 8.5mm

Engine has been dynod at Westech Performance and comes with the dyno sheet

HARDCORE BBC 4 bolt main stroker engine 496ci, combination is a Hyd Roller cam set up and designed to run on pump gas fuel

HERE IS YOU TUBE LINK TO THE DYNO

This engine has been professionally built buy us at Hardcore, we have 40 years experience in Hi performance street engines that run on 91oct gas to outright 6 second racing engines that make 3000+HP

This engine was designed to go in a street rod or show car and was built with longevity in mind using the best parts for the budget we had in mind at $8500

Here is the build list for the engine

Block GM GenV
Block was cleaned and magged, mail line checked, bored and hones to 4.310 with a torque plate, block was then square decked

Crank Eagle cast steel 4.250 stroke
Rods Scat forged I beam with ARP 8740 cap screws
Pistons Racetec forged 4032 with 20cc dome
Rings Total Seal plasma moly 1.5mm 1.5mm 3mm
Damper Pro Street 8" with Milodon bolt
Cam Comp Cams Custom Hyd Roller
Lifters Lunati Hyd Roller
Timing Set Comp Cams billet dual roller with torrington thrust bearing
Oil pump Melling M77HV with HD drive
Oil pan Milodon 6QT with pick up
Push rods Lunati 3/8 chrome moly
Heads Hardcore custom built with SI valves and Lunati spring kit
Rockers Scorpion Alum 1.7 ratio
Intake Edelbrock Victor JR
Carb 950 Holley Ultra HP
Distributor MSD ready to run, comes with coil wiring and bracket
Wires MSD 8.5mm

Engine has been dynod at Westech Performance and comes with the dyno sheet

This engine was designed to go in a street rod or show car and was built with longevity in mind using the best parts for the budget we had in mind at $8500

This is built for a car not a boat?


Sent from my iPhone using SoCal Jet Boats

Sent from my SAMSUNG-SM-G935A using SoCal Jet Boats mobile app

I didn't know the engine would know what it's actually installed into.


Sent from my iPhone using SoCal Jet Boats

Crickets "onthenos" we got crickets!!!!! Lmfao!!! 

your friendly local v-drive owner

This is a funny statement.  Since all of us that build our own shit have a good idea how it works!!!  When you write the check for your hi dollar build you only know what you were told!!!!

your friendly local v-drive owner

That is a very true statement! Lol

Sent from my LG-K330 using SoCal Jet Boats mobile app

I did see the note but some of the guys on here don't understand that the two are different.


Sent from my iPhone using SoCal Jet Boats

Hi Jim my mistake, i copied and pasted a previous ad of mine from CL for a street rod engine, you are correct they are different, Street has different clearances and ring gaps, boat engines are built like drag race engines or street/strip(i will go back and edit AD

This one is a boat application with correct clearances for Boat application

He said it was built for a boat. Why do you say its a car build?

Sent from my E6782 using SoCal Jet Boats mobile app

He said it was built for a boat. Why do you say its a car build?

Sent from my E6782 using SoCal Jet Boats mobile app

Mattson, sevans01 is correct after i realised the mistake i went back to correct the post so it reads correct now