SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: metalmulisha5006 on September 15, 2016, 10:01:30 AM
-
8-71 bds blower
Weiand square port intake with pop off plate
43 and 54 pulleys and belt
2 groove v belt pulley balancer adapter
Set up for 4150 carbs
Scoop and air filters
All polished looks great has 100 miles on it
4000obo 304-593-8020 txt
-
Bump
Will do some trading lemme kno what you have
-
Would this work on a mark IV block? and what parts if any are missing in the complete setup. Is ready to bolt on minus gaskets or something
Sent from the Waterwheel crew
-
It's a complete blower all you need is carbs and linkages. You can either go 15% under driven or 25% over driven all you need is intake gaskets and intake to blower gaskets. It has 100 miles on it no need to change the gear oil or anything
-
Works on 2 piece rear main seal blocks
-
I sent u a dm
Sent from the Waterwheel crew
-
Hey can you just txt or call me I just got ur messege 304-593-8020
-
Bump 3500 shipped low as I'll go
-
Bump
-
What would you trade for. What's the reason you unloading her.
-
Iam interested
-
Goin with a big in nitrous set up less weight
Looking for 4.500 4.600 bore blocks aluminum heads stoker cranks
-
I will have some 13.8 compression custom cp Castillo pistons pistons forsale soon. I believe they are 4.5 bore. Let me talk to my builder and double check if your interested. Came out of a nitrous motor and are good to go.
Sent from my iPhone using SoCal Jet Boats
-
Pistons on a 540 555 or 565