SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: Hardcore1 on February 13, 2017, 11:31:23 AM
-
HARDCORE BBC 4 bolt main stroker engine 496ci, combination is a Hyd Roller cam set up and designed to run on pump gas fuel, 650+HP (engine is broke in and dyno;d and comes with dyno sheet)
This engine has been professionally built buy us at Hardcore, we have 40 years experience in Hi performance street engines that run on 91oct gas to outright 6 second racing engines that make 3000+HP
This engine was designed to go in a street rod or show car and was built with longevity in mind using the best parts for the budget we had in mind at $8500
Here is the build list for the engine
Block GM GenV
Block was cleaned and magged, mail line checked, bored and hones to 4.310 with a torque plate, block was then square decked
Crank Eagle cast steel 4.250 stroke
Rods Scat forged I beam with ARP 8740 cap screws
Pistons Racetec forged 4032 with 20cc dome
Rings Total Seal plasma moly 1.5mm 1.5mm 3mm
Damper Pro Street 8" with Milodon bolt
Cam Comp Cams Custom Hyd Roller
Lifters Lunati Hyd Roller
Timing Set Comp Cams billet dual roller with torrington thrust bearing
Oil pump Melling M77HV with HD drive
Oil pan Milodon 6QT with pick up
Push rods Lunati 3/8 chrome moly
Heads Hardcore custom built with SI valves and Lunati spring kit
Rockers Scorpion Alum 1.7 ratio
Intake Edelbrock Victor
Carb Holley 950HP
Distributor MSD ready to run, comes with coil wiring and braket
Wires MSD 8.5mm
Call Andy at Hardcore Racing Engines 909 851 8251
-
More pics
-
Youtube video link of the dyno
youtu.be/uGSpZVXPrUY