SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: bertus on March 17, 2010, 07:10:37 PM
-
Here is a list of what I have that I need to sale. Dont wanna do it but I have to. :banghead: :banghead:
D0ve-c heads non ported in good shape w/comp cams springs - $200
Milodon Oil Pan (Gold) I believe its an 8 qt pan front sump. Dirty in pics but will be clean - SOLD
Moroso Aluminum Valve Covers (Gold) - $50
460 Block Casting D1ve bored .030 over (needs a honing, other than that in good shape) - $100
Weiand Tunnel ram w/interchangeable top polished(set up for two 4bbl now) - SOLD
Comp Cams Camshaft #34-331-4 Specs: http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=989&sb=2
Also have double chain timing set with harmonic balancer for it as well. - $100 for all
Ford crankshaft 2y (needs one of the rod journals polished) Internally balanced - $30
MSD Ignition Box MSD 6A - SOLD
MSD Coil Blaster 2 $30
Pm me on here or feel free to give me a call 760-576-7152 Robert
-
pics
-
Oh yeah no lifters. I do have the pushrods however 3 of them will need to be replaced due to slight rusting. All prices are OBO and I can ship at your cost.
-
more pics
-
Robert word is you have a motor to drop in :thumbup: thats going to put you in the water this summer ;D
-
Hopefully. I should have it by fri sat. Thank god for good friends (and thier dads). He's got money and is going to run a fully built and stroked 460 with blower. Hand me downs are awesome!
-
what size are the valves and are they s/s
do the heads come as pictured with rockers and guide plates?
thanks ralph
oh yeah, what is the rocker arm ratio
-
valves are stock oem. non s.s. no roller rockers but the studs and guide plates are there and the rockers were 1.73's.
-
valves are stock oem. non s.s. no roller rockers but the studs and guide plates are there and the rockers were 1.73's.
thanks bro,
i'll pass
-
I'll take the valve covers if you still have them
-
Yes I do still have them. They are cleaned and ready to go.
-
V.C.'s sold
-
Alright so i need to move this stuff asap as i am moving and would prefer not to lug it all around with me. Sooo new prices:
D1VE block already .030 over needs honing - $30
D0VE-C Heads stock valves w/studs for roller rockers from comp cams ready to bolt on and go - $100
Comp cams cam #34-331-4 - $50 w/double chain timing set
Ford 2y crankshaft .010 undersize freshly polished internally balanced - $30
Ford 2y crankshaft needs polish/undersize - $10
Msd blaster 2 ignition coil - $10
Call/text/pm Rob at 760-576-7152
-
I'll take the DOVE-C heads. Have they been maged?
-
No they have not been magged. they were fine when i pulled them off the block the only thing i have done since then is pulled the roller rockers off.
-
I am in San Diego and you are in Temecula , any chance you would want to meet in the middle and I will bring cash?
-
sounds good i will actually be down there tomorrow afternoon.
-
if you want give me a call at 760-576-7152
-
is the block still for sale? r u willing to ship it? i think thats what i need.
-
Are the heads and cam still avail?
-
Are the heads and cam still avail?
I am still waitng to meet up and pay for the heads , There mine!
-
sorry mark the heads are toast. had them magges and there were a few cracks in them and two of the exhaust valves were leaking at 40%