SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: glencoe460 on February 06, 2017, 09:03:26 PM
-
My block is already bored 040 over wondering if thats as much as i should go or get a new block...Anybody have a block you dont need willing to sell? dive 6015 a2a is what i have and i need of another.
Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
On a mild to medium build... .060 is not a problem and wouldn't worry about it too much. I know some guys will go .080 on stroker kits... but I get nervous about going that far without sonic checking the block for thickness and also making sure it is not crusty in the water passages. More than once, have had them develop a pin hole in the cylinder on crusty .080 over blocks.
Sent from my iPhone using SoCal Jet Boats
-
On a mild to medium build... .060 is not a problem and wouldn't worry about it too much. I know some guys will go .080 on stroker kits... but I get nervous about going that far without sonic checking the block for thickness and also making sure it is not crusty in the water passages. More than once, have had them develop a pin hole in the cylinder on crusty .080 over blocks.
Sent from my iPhone using SoCal Jet Boats
Thanks considering all my options to fit the budget...motor failed compression test so its on to the drawing board
Sent from my SM-G930T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)