SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: msisco on July 19, 2014, 05:35:34 PM
-
All original, Standard Bore, crank bearings and rod bearings. Rebuilt with less than 4 hours run time on everything. Original LS6 engine from my 1974 Hallett River Cruiser. Hardin Marine OEM engine.
750 marine holley double pumper square bore, mechanical secondaries. Includes Billet fuel rail. New.
Holley 110gph 7 psi mechanical fuel pump. New.
Original "winters" Hi Perf dual plane aluminum manifold. ARP stainless intake bolts. New.
Original 990 heads, large rectangle ports, clay smith springs, retainers, locks etc. Fresh rebuild/valve job. Polished Aluminum valve covers. New.
Clay Smith H274 cam ground for this build 21' jet boat. Clay Smith hp lifters. New.
Original TRW forged pistons. 9.5 to 1 compression. New Rings.
Original Forged Dimple Rods with upgraded ARP rod bolts. Fresh & Resized.
Original Forged GM crank. Fresh journal polished. Std sized Clevite 77 bearings on all.
Original Hi Perf 4 bolt block. Honed cylinders. Std bore. Cam bearings and Freeze Plugs. New.
Mellings HV oil pump with ARP drive rod, stainless ARP bolts. All New.
Canton Racing 10 quart oil pan.
MSD E curve Distributor and Billet hold down with stainless ARP stud/nut. New
Comp cams billet aluminium two piece timing cover with Cloyes billet hex adjust roller timing chain. New.
MSD plug wires. New
OEM flywheel.
OEM dampener with ARP bolt.
All Felpro gaskets.
Ready to drop in and run!
Asking price $3,900.00. Considering trades on other hi perf bbc parts or ?
Decided to build a 540ci..
Located in Costa Mesa, Ca
Mike 949-456-0055
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Edit: I ran the boat at Lake Elsinore last weekend. Now the engine has Seven hours on it. Ran great! Price firm at $3,900.
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
That looks like a good deal and a reliable turn key motor. Who did the machine work?
-
Costa Mesa R&D did the heads. Santa Ana Speed shop did the block and assembly.
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Costa Mesa R and D did the heads.
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
You still have the motor for sale?
-
I still have it.
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Exhaust come with it☺
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Nice! A Costa Mesa guy here as well, that's a helluva motor for that price. Good luck with the sale. Where in CM are you?
Sent with my Fingers
-
Exhaust come with it☺
Sent from my SCH-I545 using SoCal Jet Boats mobile app
Yes, for an extra 1,100 ;D
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
Nice! A Costa Mesa guy here as well, that's a helluva motor for that price. Good luck with the sale. Where in CM are you?
Sent with my Fingers
Thanks fellow Costa Mesa Resident. I'm in Mesa Verde. Where are You?
I don't really want to sell this setup but I need the funds to build the 540ci. I have the Dart Big M Tall Deck and Pro One heads new in the box but im still a few bucks short to finish it. ::)
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
I'm over off Bristol and Paularino. Lmk if you ever need an extra hand.
Sent with my Fingers
-
I'm over off Bristol and Paularino. Lmk if you ever need an extra hand.
Sent with my Fingers