SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: Beaveretriever on July 02, 2015, 12:02:33 PM
-
I have a complete 3" crower stack injection for a bbc. I have a pump, front cover, pills, shut off and filter. The injection is currently set up for gas. The system is ready to bolt on. $3500 obo
Thanks
The Beav
Dave
714-422-7329
-
Some photos might help
-
Dave, if you sell it how are you gonna put it on another boat ?????
Sent from my iPhone using SoCalJetBoats mobile app
-
Dave, if you sell it how are you gonna put it on another boat ?????
Sent from my iPhone using SoCalJetBoats mobile app
I can build one right now anyways. Anne and I are paying for a wedding, so fast boats are on hold for a little bit.
-
Damn Dave, every time I see this thing it makes me want to buy a motor and start building it...
-
Damn Dave, every time I see this thing it makes me want to buy a motor and start building it...
You should :-)
-
Bump
-
Bump
-
Sold
-
Come on guys buy it and you will have one cool motor... This is what my motor looks like
-
Where can I find a gen 6 cam button 3/8 hex head to run my river rat water pump
-
Where can I find a gen 6 cam button 3/8 hex head to run my river rat water pump
Try good vibrations. I think they are in Santa fe springs or Norwalk. Look them up and give them a call.
-
Just curious, I know this is an old thread but what kind of power were you making with this and what was the engine combo?
Sent from my iPhone using SoCal Jet Boats
-
Never dynoed the motor. But I had a 468 full roller with 990 heads. It pushed my 19 daytona 104 up river in parker. I would say it made a solid 600 hp
-
Never dynoed the motor. But I had a 468 full roller with 990 heads. It pushed my 19 daytona 104 up river in parker. I would say it made a solid 600 hp
Nice, sounds like a healthy combo. How was the idle and part throttle manners? I've always wondered about mechanical injection
Sent from my iPhone using SoCal Jet Boats
-
Come On Couey put some injectors on the beast, it'll make a huge difference
Sent from my iPhone using SoCal Jet Boats
-
Nice, sounds like a healthy combo. How was the idle and part throttle manners? I've always wondered about mechanical injection
Sent from my iPhone using SoCal Jet Boats
Mine idled great and was good part throttle. Just like driving a carb motor. It would load up a little bit coming out of Bluewater in parker. But other than that it was great. I didn't run any bypass valves or anything fancy. Just tuned it really good. There are a million adjustments that can be made with them, one to many turns here or not enough there will screw up the entire set up. But if you can tune then they are great. They take a little work at the river through out the year or if you go different places. Unlike a carb, altitude and barometric pressures will mess up a good tune.
-
Come On Couey put some injectors on the beast, it'll make a huge difference
Sent from my iPhone using SoCal Jet Boats
Lol. Right now I'm thinking of injecting something..... Nitrous!
Sent from my iPhone using SoCal Jet Boats
-
Mine idled great and was good part throttle. Just like driving a carb motor. It would load up a little bit coming out of Bluewater in parker. But other than that it was great. I didn't run any bypass valves or anything fancy. Just tuned it really good. There are a million adjustments that can be made with them, one to many turns here or not enough there will screw up the entire set up. But if you can tune then they are great. They take a little work at the river through out the year or if you go different places. Unlike a carb, altitude and barometric pressures will mess up a good tune.
Gotcha. Thanks for the info. I always knew they looked sweet but wondered about the performance and drivability. I have an edelbrock victor ram and dual 1050's currently on mine. Everybody says switch to single carb but I want something with the wow factor when you look at it
Sent from my iPhone using SoCal Jet Boats
-
Shit you have 2 1050s on a tunnel ram? How big is the motor? That's a lot of carb
-
Shit you have 2 1050s on a tunnel ram? How big is the motor? That's a lot of carb
It's just 496". Big heads and big solid roller though, I've been back and forth with these and a set of 750's I have and think ideally it probably needs 850 or 950hps. These older doms I don't think flow quite 1050 as advertised though. C and J and carb shop both seemed to think either size could work on my combo
Sent from my iPhone using SoCal Jet Boats
-
Gotcha. Thanks for the info. I always knew they looked sweet but wondered about the performance and drivability. I have an edelbrock victor ram and dual 1050's currently on mine. Everybody says switch to single carb but I want something with the wow factor when you look at it
Go for a pair of Flying Toilets
-
Lol, I'm actually up in the air on just going back to the 750s cause they behaved better
Sent from my iPhone using SoCal Jet Boats
-
Lol, I'm actually up in the air on just going back to the 750s cause they behaved better
Sent from my iPhone using SoCal Jet Boats
. What do you want for the 1050's
Sent from my iPhone using SoCal Jet Boats
-
. What do you want for the 1050's
Sent from my iPhone using SoCal Jet Boats
Not sure I'm ready to sell them, haven't thought of a number yet. Let me kick it around for a minute and get back to you on that. Cool?
Sent from my iPhone using SoCal Jet Boats
-
No worries i'm no hurry.
-
Something like this guys
I have a scat crank and I'm trying to figure out what internal flex plate to use. It's a mark 4 block 454
-
Sweet
I have a scat crank and I'm trying to figure out what internal flex plate to use. It's a mark 4 block 454