SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: nucking futs on June 30, 2015, 12:40:39 PM
-
fresh 548 pump gas engine 775hp @ 6200 668trq @ 5500 gen 6 8.2 block bored .030 over 10.2:1 comp, line bored, scat forged crank detailed by Castillo, eagle h beam rods with arp 2000 bolts, srp small domed pistons, seal pro rings naiper second, rings gaped for small amount of nitrous mls head gaskets brand new AFR 325 cnc heads, manley push rods, crane gold rockers 1.7 rr on ex crane 1.8 rr on in, straub cust ground cam shaft, morel 842 solid roller lifter. cloyes billet double roller, edelbrock victor (new) holley 1050 dominator (new) B&B 10 qrt jet oil pan (new) blueprinted oil pump (new) msd crank trigger ign, aerospace vac pump, needs ign box and a fuel pump to run!! looking to get $7500
-
fresh 548 pump gas engine 775hp @ 6200 668trq @ 5500 gen 6 8.2 block bored .030 over 10.2:1 comp, line bored, scat forged crank detailed by Castillo, eagle h beam rods with arp 2000 bolts, srp small domed pistons, seal pro rings naiper second, rings gaped for small amount of nitrous mls head gaskets brand new AFR 325 cnc heads, manley push rods, crane gold rockers 1.7 rr on ex crane 1.8 rr on in, straub cust ground cam shaft, morel 842 solid roller lifter. cloyes billet double roller, edelbrock victor (new) holley 1050 dominator (new) B&B 10 qrt jet oil pan (new) blueprinted oil pump (new) msd crank trigger ign, aerospace vac pump, needs ign box and a fuel pump to run!! looking to get $7500
thats a bad ass deal Tim! 👍👍 wish I had money for a spare.
"RTCP"
-
Got any pics
-
Old blueberry mill 👍 clm performance
Sent from my iPhone using SoCal Jet Boats
-
fresh 548 pump gas engine 775hp @ 6200 668trq @ 5500 gen 6 8.2 block bored .030 over 10.2:1 comp, line bored, scat forged crank detailed by Castillo, eagle h beam rods with arp 2000 bolts, srp small domed pistons, seal pro rings naiper second, rings gaped for small amount of nitrous mls head gaskets brand new AFR 325 cnc heads, manley push rods, crane gold rockers 1.7 rr on ex crane 1.8 rr on in, straub cust ground cam shaft, morel 842 solid roller lifter. cloyes billet double roller, edelbrock victor (new) holley 1050 dominator (new) B&B 10 qrt jet oil pan (new) blueprinted oil pump (new) msd crank trigger ign, aerospace vac pump, needs ign box and a fuel pump to run!! looking to get $7500
Damn wish I had the cash!
Someone's getting a bitchin deal
Sent from my iPad using SoCalJetBoats
-
Damn that would wake the old sprint up
-
Just a heads up with this deal, it is the same combo I ran in the blue boat for six years. The only thing different is, it does not have a tunnel ram. The old combo made 801 @6200 that why I subtracted the hp I did with the single. The engine is not complete at the moment, just need to tie up a few loose ends. I opted to put new lifters rather than the rebuilt morals in it and am waiting on the carb and lifters. It also will have a nos plate system on it. The only used parts are the crank, rods, pistons and cam, which were all sent out and got the seal of approval. I would really like to dyno this engine before I let it go or at minimum put it in my boat and put it through the paces. If it goes to the dyno the price will reflect the additional charge in it. Im basically giving this thing away at the price listed.
-
Yeah your giving it away such a nice guy 😜
Sent from my iPhone using SoCal Jet Boats
-
Yeah your giving it away such a nice guy 😜
Sent from my iPhone using SoCal Jet Boats
price it all out slim, that's about 50 cents on the dollar to build it. plus its not used up. Its fresh O0
Or I could just put it in the Turkey boat and break it of real deep in you. hahahaha
-
I'll trade you a blown up 515 and a critical condition 421 for it Tim! Lol that's an awesome deal on the motor.
Sent from my iPhone using SoCal Jet Boats
-
thats a bad ass deal Tim! 👍👍 wish I had money for a spare.
"RTCP"
I want can I pay with monopoly money.
-
We're are you located?
Sent from my iPhone using SoCal Jet Boats
-
We're are you located?
Sent from my iPhone using SoCal Jet Boats
Orange ca
-
Pics !!!
-
Pics !!!
The vector
Needs this
Sent from my iPhone using SoCalJetBoats
-
Why do you think I asked how much :o
-
Few changes were made. It now has a reher Morrison cnc victor and a pro systems 1250 dominator. It's ready to go to the dyno. I did not put the plate system on it but I do have it. The headers are not for sale and the price will reflect the dyno cost. I just want everything to be tits when it sells. After the dyno it's all on the new owner lol
Sent from my iPhone using Tapatalk
-
👏🏻👏🏻👏🏻 oooo I want this
Sent from my iPhone using SoCal Jet Boats
-
I'm about to go take out a loan.....😍😍😍
Sent from my iPad using SoCalJetBoats
-
Its going to Westech dyno aug 19. Will post the results. :thumbup:
-
Ok it's off the dyno and ready to go. Made 700 ft# at 5k and 748@ 6400. That is with out the vac pump. Makes 774 @ 6400 with vac pump. Belt broke before final pulls. Air fuel is tits and had great oil pressure. If you put a tunnel ram with a couple 1050's it will make over 800 no problem. Remember this is a pump gas engine.
Sent from my iPhone using Tapatalk
-
What kind of cam specs to make that power? Sounds like a nice engine and hell of a deal!
Sent from my iPhone using SoCal Jet Boats
-
How about a motor raffle 160 tickets for $50 count me in for two
-
How about a motor raffle 160 tickets for $50 count me in for two
😂 👍🏻👍🏻 I'll buy 4
Sent from my iPhone using SoCal Jet Boats
-
Sold
Sent from my iPhone using Tapatalk