SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: 42johnny on July 04, 2010, 01:09:15 PM

Title: gen 6 502 long block
Post by: 42johnny on July 04, 2010, 01:09:15 PM: intake to pan 502 #10237300
flat tappet cam, needs rebuilt (came out running though)

$2500.00

Johnny
Title: Re: gen 6 502 long block
Post by: quick olds on July 07, 2010, 03:37:38 PM: What kinda rebuild? Rings or bearings and all?
Title: Re: gen 6 502 long block
Post by: 42johnny on July 07, 2010, 04:45:53 PM: I have 2 motors, here is the description..

motor 1...
removed from boat for inspection, had no known problems
was complete running motor,intake and heads removed.
std bore and no ridge...
approx 250 hr.

motor 2...
had motor noise and found bad rod bearing.
block sent to machine shop.
had heads done and ports cleaned up.
block was hot tanked.
bought 10/10 crank , polished and fluxed.
nothing done to block or rods.
std bore...
approx 275 hr.

these have flat tappet cams, the mechanic removed the engines and told me these should be roller.
I do not really know, all I know is they have flat tappet now and could have rollers in them again.
I could have had the crank turned, but a fellow board member changed his mind and went 540 on his build. That is why the crank was bought.

Johnny
Title: Re: gen 6 502 long block
Post by: quick olds on July 07, 2010, 05:06:10 PM: The price is 4 both or 1?
Title: Re: gen 6 502 long block
Post by: 42johnny on July 07, 2010, 05:10:42 PM: Quote from: quick olds on July 07, 2010, 05:06:10 PM
The price is 4 both or 1?

one...
Title: Re: gen 6 502 long block
Post by: quick olds on July 07, 2010, 05:19:54 PM: Ok im going to try to sell my olds 4 around the same price i may wait till the end of season tho i just rebuilt it and its runnin great so im going to sell at the end of the season and put a chevy together whats the compression on the 502s tho? Im kinda in the air with the olds at this point dont know weather to sell or wait
Title: Re: gen 6 502 long block
Post by: 42johnny on July 07, 2010, 05:23:13 PM: Quote from: quick olds on July 07, 2010, 05:19:54 PM
Ok im going to try to sell my olds 4 around the same price i may wait till the end of season tho i just rebuilt it and its runnin great so im going to sell at the end of the season and put a chevy together whats the compression on the 502s tho? Im kinda in the air with the olds at this point dont know weather to sell or wait

I have no idea since it is a crate motor I would say about 9 to 1 but you can look up the block number for info #10237300

johnny
Title: Re: gen 6 502 long block
Post by: 42johnny on July 13, 2010, 09:08:14 PM: price drop to $2500
Title: Re: gen 6 502 long block
Post by: quick olds on July 23, 2010, 01:18:40 PM: take a hull and trailer for trade
Title: Re: gen 6 502 long block
Post by: 42johnny on July 24, 2010, 11:03:02 AM: Quote from: quick olds on July 23, 2010, 01:18:40 PM
take a hull and trailer for trade

not at this time....

I got 5 boats....
Title: Re: gen 6 502 long block
Post by: quick olds on July 25, 2010, 02:07:03 PM: Every1 could use another boat lol
Title: Re: gen 6 502 long block
Post by: thekraziestdago on September 22, 2010, 02:49:06 PM: Are the blocks still available, and if so where are you located im might be interested if the price is right...