SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: 2savage4you on April 18, 2010, 06:30:31 AM

Title: Harland sharp rollers & girdles
Post by: 2savage4you on April 18, 2010, 06:30:31 AM

$225
Low miles about 200 , i need to run shorter Valve covers and these wont fit.
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi223.photobucket.com%2Falbums%2Fdd269%2F2savage4you%2F001-22.jpg&hash=41058fc8f21475fa41c2582bb10b0979eb808441)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi223.photobucket.com%2Falbums%2Fdd269%2F2savage4you%2F003-13.jpg&hash=2b172957dba59a86f64216e57c0eea8e2c5569d0)
Info on them.
http://www.summitracing.com/parts/CSP-G1100-38/
http://www.summitracing.com/parts/CSP-S1003/

Title: Re: Harland sharp rollers & girdles
Post by: HDriderTH on April 18, 2010, 07:25:41 AM

Let me see if my short covers clear my rockers. Why u need short cover, AC or something? I have a blown SB in my car w/ HS rockers was gonna run stock LT-1 aluminum v-covers

Title: Re: Harland sharp rollers & girdles
Post by: 2savage4you on April 18, 2010, 07:38:38 AM

Quote from: HDriderTH on April 18, 2010, 07:25:41 AM

Let me see if my short covers clear my rockers. Why u need short cover, AC or something? I have a blown SB in my car w/ HS rockers was gonna run stock LT-1 aluminum v-covers

Yes the AC line's will hit the pass side V/C  and the P/S bracket on the drivers side. I can make it work, but if i ever want to adjust the valves i will need to take it all off to do so.

Short V/C's will eliminate all problems above. Will run the Comp Mag rollers with center bolt covers and have plenty of clearance.

Besides the rollers are a big ratio for a sbc and i am going to make it a lil more streetable.