Dooley pan, windage tray, oil pickup, and a New fel Pro 1 piece gasket..

Fits jet drive.........




$275

Pics coming

here is some pitting, the worst spot on it.



As you can see, it's not as bad as it looks...

Sav-

Check your PMs

i need this bad

you do need it    so buy it so i can fix my new to me truck   

Whats wrong with your new one?

I need to change the plenum cover gasket, which is under the intake...It's a bad design and a common problem , i found oil residue when i looked through the T/B and this will cause it to lose power, vacuum leak and use oil

not going to use the stock parts, im going with this setup. http://www.hughesengines.com/Index/products.php?partid=22220

and im also getting new bolts... then im doing it or it goes to a shop but i dunno, it's kinda scary with all those solenoids and fuel injectors and shit covering the intake. So im thinking a professional should do it

And then i add a cold air intake to her   my Yota has one and let me tell you it will put that Dodge to shame power wise..........

$250 shipped depending on location

What is the measurement from the pan rail to the bottom?

The pan in my boat was 8" deep and was setting on the intake housing bolts 

If i remember right the same exact pan thats in my Carribean measured 7 1/2"s

but i can go measure again.


Ok It measures,  rear....7 7/8" and the front 7 3/4" so with a gasket installed you'r right back to 8"s 

I can't beleive noones picked this thing up! They go for over $400 on Ebay every time I see one! I'd buy it in a heartbeat if there was even a remote possibility of me installing a chebbie in something in the near future.

Ray

Its ok Ray, you can come over to the Dark side! We dont mind!

Jeremy, you DO realize you're borrowing my boat which is a FORD, lol? 

Still, I've been processing in my lil brain what use I would have for it. At $250 it's a STEAL!

Hell, might make a good window planter box for that price! Or Bread Pan, orrrrr...... OK, I'm leaving it alone.

Ray

Bump!!!!!!!

SOLD!!!!!!!