SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: Bunger on May 01, 2016, 05:41:01 PM

Title: Oil cooler setup
Post by: Bunger on May 01, 2016, 05:41:01 PM

Got a Eddie marine oil cooler setup I just pulled off my boat. Ran once at Elsinore for about and hour and realized i had too much oil in my motor causing high oil temps so I don't need it. Paid about 350 for the whole setup. 250$ takes the cooler, mounts, sand which adapter and the lines of you want em.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: Bunger on May 01, 2016, 05:44:16 PM

Pics


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: vwagon13 on May 02, 2016, 08:13:19 AM

What are the dimensions of the cooler? And what size are the lines, sixes and eights? Thank you sir!

Title: Re: Oil cooler setup
Post by: Bunger on May 02, 2016, 08:26:27 AM

Oil ports are 1/2" and Plummer with -8 and water ports are 3/4" Plummer -10.  I believe the cooler is 12" long by 2 1/8" diameter. I think overall with all fittings connected it's about 18" long


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: Bunger on May 02, 2016, 08:26:39 AM

Plummed*


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: Bunger on May 02, 2016, 08:27:08 AM

I can get you exact measurements of u want but those are pretty close


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: vwagon13 on May 02, 2016, 09:33:16 AM

Pm sent

Title: Re: Oil cooler setup
Post by: Gus 82209 on July 11, 2016, 01:53:29 PM

Hello.  Do you still have this for sale? 

Title: Re: Oil cooler setup
Post by: Bunger on July 11, 2016, 02:02:11 PM

Sold it aWhile back sorry


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: crusader1 on July 11, 2016, 05:47:56 PM

What brand of cooler was that? Where did you pick it up?


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: vwagon13 on July 11, 2016, 08:31:11 PM

Quote from: Bunger on May 02, 2016, 08:26:27 AM

Oil ports are 1/2" and Plummer with -8 and water ports are 3/4" Plummer -10.  I believe the cooler is 12" long by 2 1/8" diameter. I think overall with all fittings connected it's about 18" long


Sent from my iPhone using SoCal Jet Boats

Bunger, the mounting brackets , they were 2-inch inch?
I see where you took the water from, but where did you dump it?
 And your water pressure, was it about 10 maybe 12 pounds?
 Thanks for the info. To install it shortly.

Title: Re: Oil cooler setup
Post by: Bunger on July 13, 2016, 04:06:51 PM

Quote from: vwagon13 on July 11, 2016, 08:31:11 PM

Bunger, the mounting brackets , they were 2-inch inch?
I see where you took the water from, but where did you dump it?
 And your water pressure, was it about 10 maybe 12 pounds?
 Thanks for the info. To install it shortly.

Ya I believe 2 1/8. It came with o rings but they were the wrong size so I used the electrical tape your see in there. I dumped the water right out the back of the boat. And ya water psi is roughly 10-15. Make sure you post some pics when u install it I wanna see


Sent from my iPhone using SoCal Jet Boats

Title: Re: Oil cooler setup
Post by: Bunger on July 13, 2016, 04:07:38 PM

Quote from: crusader1 on July 11, 2016, 05:47:56 PM

What brand of cooler was that? Where did you pick it up?


Sent from my iPhone using SoCal Jet Boats

It's Eddie marine. I bought it off a guy on performance boats. He bought it and never used it. I think they run like 130-150$ on eddies website


Sent from my iPhone using SoCal Jet Boats