SoCal Jet Boats

Classifieds => Engines / Engine Parts For Sale => Topic started by: lifted250 on January 22, 2015, 07:58:01 AM

Title: Oil restricting push rods
Post by: lifted250 on January 22, 2015, 07:58:01 AM: Up for sale are a set of push rod
Oil restricted a must have for any olds I changed my heads so I need longer
$125 or trade for roller rockers 1.6 ratio 7/16 stud

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: lifted250 on January 24, 2015, 06:09:59 PM: Bump

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: lifted250 on January 29, 2015, 07:35:47 PM: Bump

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: Lonerider on February 12, 2015, 08:06:07 PM: Are these still available & ifso what is your best price?
Title: Re: Oil restricting push rods
Post by: lifted250 on February 12, 2015, 08:35:43 PM: 100 and yes there still for sale

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: Bunger on February 12, 2015, 09:29:33 PM: What heads required longer rods?

Sent from my iPad using SoCalJetBoats
Title: Re: Oil restricting push rods
Post by: lifted250 on February 12, 2015, 09:46:37 PM: It's when u go to edlebrocks the stock push rods are 9.5 long
When u do roller rockers the new push that I had made are 2/8 9.8 long

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: lifted250 on February 12, 2015, 09:47:40 PM: 3/8

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: lifted250 on February 12, 2015, 09:48:35 PM: When You change ur rockers

Sent from my iPhone using SoCal Jet Boats
Title: Re: Oil restricting push rods
Post by: Redeye1620 on February 22, 2015, 11:17:01 AM: Quote from: lifted250 on February 12, 2015, 09:48:35 PM
When You change ur rockers

Sent from my iPhone using SoCal Jet Boats

Also when you change cams check with the cam manufacturer. Some use a smaller diameter base circle and then you need longer pushrods....