SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: Just Electric on May 18, 2014, 09:52:46 PM
-
Wieand oval port tunnel ram Holley 6109 750 carbs complete 650 bucks tunnel ram itself 250 carbs 400 dual plain oval port intake needs one screw hole welded would do it but my tig welder took a shit 40 bucks
Sent from my iPhone using SoCalJetBoats mobile app
-
Dominator 1050's list#9375 600 bucks
Sent from my iPhone using SoCalJetBoats mobile app
-
That single quad dual plane intake, is that for peanut port heads? What make is it? Price?
Thanks,
Joe
-
Dominator 1050's list#9375 600 bucks
Sent from my iPhone using SoCalJetBoats mobile app
2 circuit 3 circuit on the 1050's
Sent from my iPhone using SoCalJetBoats mobile app
-
Hang tight jake sale might be pending I will look in the morning at get back to ya
Sent from my iPhone using SoCalJetBoats mobile app
-
But off the top if my head there two circuit cause I believe they have four air bleeds on the top I will double check though
Sent from my iPhone using SoCalJetBoats mobile app
-
Dominators are sold
Sent from my iPhone using SoCalJetBoats mobile app
-
Tunnel ram sold
Sent from my iPhone using SoCalJetBoats mobile app
-
Hi Just Electric,
I have a peanut port head build in progress that I am looking for a dual plane intake for. Is this manifold for peanut port heads? It looks like the ports are slightly shorter than the TR you have posted, compared to the center bolt holes. Is it still available? Price? Make?
Thanks,
Joe
-
I'm trying to look up info on the only two numbers I found on the mani. The manifold was origanly on my boat when I purchased it 7 years ago and my heads were 049 ovel ports. Let see what info I come up with snd I will get back to ya
Sent from my iPhone using SoCalJetBoats mobile app
-
From the casting number I found its zn edelbrock performer oval port manifold
Here's the info on it
And 40 bucks
Sent from my iPhone using SoCalJetBoats mobile app
-
Bump for dual plain
Sent from my iPhone using SoCalJetBoats mobile app