I have a complete 509" BBC by Teague built for a jet boat. Includes the following:
Merlin II BBC std deck block - std bore (4.500" bore)
Std/Std 5140 steel crank with 4.000" stroke
Custom JE pistons (#180656) 9.7:1 compression
low tension oil rings / .990' full floating pins
Manley rods (6.385") wiht ARP bolts (part# 14062)
Ported Merlin 310 open chamber aluminulm heads
Inconel exaust calves (+.100") (1.880")
Stainless intake valves (2.250)
Crane solid roller cam with gold race roller rockers and crane stud girldle (#13R000215)
.714 lift
Moroso 10qt jet pan with H/V oil pump
This is a bad ass motor. Built by Teague with a full build sheet and all clearances. All parts were new and not rebuilt as you can see, it's all standard. Virgin block, crank, rods, and pistons. This motor came from the CP 19' I just sold and it ran 99 on GPS in good air. The previous owner had the motor built by Teague for the CP and estimated 10-12 trips on it and around 720 hp. The reciept for the short block was $11k without the heads. This motor would make somebody REAL happy...
$5500 obo for the complete long block, $6500 complete with the polished TR2 T-ram (port matched) Dual double pumpers and scoop. I'll get some pics up soon.
Somebody must be ready to step up to a bad ass mill!!!