BBC Stuff

« **on:** May 19, 2009, 09:57:50 PM »

Roller cam and square port head combo Crane cam with hyd roller lifters, Mark IV rec port heads and valve springs. Cam marked 13-1801. Crane timing set. It was in a jet boat with mild compression. Heads need to be gone through but it would make a great top end. Heads casting # 14096188 - $650 for all

Dana billet steps- good shape but need to be recoated. 23" x 12". $150 obo

BBC MSD ignition- complete. Includes billet distributor, 6AL box w/ a spare, MSD coil, and MSD wires. $250

454 motor- unassembled, .020 over bore, stock rods, pistons with small pop up, cast crank, 2.750 main, 2.200 rod, oval port heads, stock pan, cast intake manifold, starter, alternator, casting #3999289. Good project motor- $400.

Stock BBC rods and flat top pistons, standard bore- $75

Polished cast alum valve covers, no breathers, $75

Stock Berkley intake, flat keel, part # H-2481 and alum TA. $50

« **Reply #1 on:** May 19, 2009, 10:08:16 PM »

I'll take the MSD set up...

Maybe even the valve covers, I'll let you know.

Will be driving down to Huntington Beach from Northern Cali on Fri the 29th and will be there til that Sunday. You're a ways out of the way, let me figure out whether to ship or pick up.

« **Reply #2 on:** May 19, 2009, 10:10:05 PM »

Hey RD, I need those platforms, I should have some "boat cash" this weekend, will get back to you via PM, are you heading to Burley?

GT

« **Reply #3 on:** May 21, 2009, 08:22:33 AM »

Sorry guys, steps and MSD sold almost immediately. I'll see what I can find for you.....

« **Reply #4 on:** May 21, 2009, 05:27:49 PM »

You mean to tell me that TEN minutes after you posted this was already too late?

Oh well I guess, was looking forward to that upgrade for a killer price.

« **Reply #5 on:** May 22, 2009, 10:39:11 PM »

Didn't see a pic of the intake, but I'll put dibs on it and the T/A

Ray

« **Reply #6 on:** May 25, 2009, 06:50:03 PM »

Actually, about 3 minutes after I posted the MSD. Guess it was a good price...........

« **Reply #7 on:** May 31, 2009, 09:11:20 PM »

Heads and cam sold, steps sold, MSD sale fell through so it's still available, stock rods/pistons $50, v/covers still available, T/A and Intake sale pending. 454 project still available, $350 for all...........

« **Reply #8 on:** June 27, 2009, 07:22:14 PM »

MSD and valve covers still availble.

« **Reply #9 on:** June 27, 2009, 10:38:34 PM »

Are you willing to go $200.00 for the MSD stuff shipped to 60056 Illinois?

« **Reply #10 on:** June 28, 2009, 09:56:20 AM »

I am so sorry John, with my boat burning and sinking thing the day after I told you I wanted them, I forgot all about this. PM me your addie again and I'll get that TCO today fot that intake/adaptor!!!

Ray

« **Reply #11 on:** June 28, 2009, 03:50:20 PM »

Sent you a PM

« **Reply #12 on:** June 28, 2009, 04:39:40 PM »

Quote from: Hurricane on June 28, 2009, 03:50:20 PM

Sent you a PM

good luck...i sent him a PM over on PB like 2 weeks ago about the MSD stuff...and another yesterday....no responce.

jason....any luck on that title for my trailer?

« **Reply #13 on:** June 28, 2009, 04:40:52 PM »

is the msd set up still available?

« **Reply #14 on:** June 28, 2009, 04:41:47 PM »

Quote from: MORBEER on June 28, 2009, 04:40:52 PM

is the msd set up still available?

looks like theres a line now....

« **Reply #15 on:** June 28, 2009, 04:44:21 PM »

Quote from: Brad @ SoCalJetBoats.com on June 28, 2009, 04:41:47 PM

looks like theres a line now....

J/K

« **Reply #16 on:** June 28, 2009, 07:36:45 PM »

:osorry!

« **Reply #17 on:** June 28, 2009, 09:02:54 PM »

Brad, sent you a PM. As you can see I don't get on here that much. Why didn't you just call?

I think I explained the trailer situation, remember.

I always try to take the PM's in line as that seems to be what's fair. Ray, that sucks bro, I didn't here about it. I've been at the river for a week myself so I'm kinda out of touch. I'l PM you my address, but if you've got bigger issues going and don't need it, no problem just shoot me a PM. Jason

« **Reply #18 on:** June 28, 2009, 11:04:23 PM »

No I still need it for the Hallet, that one didn't burn and sink.......yet...........

Ray

« **Reply #19 on:** June 29, 2009, 10:39:19 PM »

Sorry guys, MSD and valve covers sold. Brad, give me a call about the trailer. The guy I got it from is in the wind. I don't know if it would work for you or not, but I have another Competetive tandem trailer with plates and paper work. It might be a hastle to change the bunks over but from the sound of it, NEVADA is not going to make it easy on you. Cali wouldn't be a problem. You're welcome to change them out if it helps. RD

« **Reply #20 on:** June 30, 2009, 02:25:02 PM »

Do you still have the cam, lifters, springs left? What make is the cam, sorry if I missed it. Any way you can send me the specs? Thanks, "D"

« **Reply #21 on:** June 30, 2009, 02:54:31 PM »

Sorry bro, cam and lifters sold a while back....

« **Reply #22 on:** July 01, 2009, 10:15:44 PM »

no really thats fine......

« **Reply #23 on:** July 01, 2009, 11:17:44 PM »

Hey Jason,

I bought a complete motor from you about a year ago and I finally got it in and running and it runs fukn great. You gave me a great deal and just wanted to say thanks!

« **Reply #24 on:** July 04, 2009, 10:33:42 AM »

Glad to hear it running good!! Post up some pics.....

River Dad

Baja and Bust

GT Jets

River Dad

Baja and Bust

IRRebel

River Dad

River Dad

River Dad

Haulin Glass

IRRebel

Hurricane

Brad @ SCJB

MORBEER

Brad @ SCJB

2savage4you

MORBEER

River Dad

IRRebel

River Dad

walshmotorsports

River Dad

walshmotorsports

bigboy_77

River Dad