SoCal Jet Boats
Classifieds => Engines / Engine Parts For Sale => Topic started by: Brad @ SCJB on September 17, 2008, 09:01:43 AM
-
I think i put a little too much arm into it....
[attachimg=#]
i need a carter because it has to be low profile to clear the rail kit.....plus, im trying to replace whats not mine :-\
-
summit or mark and hurry
-
I don't think you have too much arm!! ;D Unless you had a cheater bar!
-
i was using a 10" crescent wrench....i put more arm into it then it could handle...and i dont got much arm to give... .... marc, i need parts! PRONTO!
-
brad always needs it yesterday it;s part of his future planning ::)
-
sorry, i dont move slow like you mohave vally folk...just ask JR ;)
-
HMMMM....STRONG LIKE BULL, :o
-
Hey Brad! you can use the Edelbrock HiPo pump also, same low profile design, also can be "clocked" like the older Carters......The Edelbrocks are actually a little shorter still.
I will scare up a P/N
GT
-
It's a good thing your ladie doesn't have a casting area on her that says "IN"
-
It's a good thing your ladie doesn't have a casting area on her that says "IN"
No but I'll bet there's one that says "OUT"... ;D
-
Edelbrock P/N 1722 ;)