Looking too see if anyone has ever bought a set of water lines that were not for your headers and you some how fabricated them to fit. What did u do and what was used. Thanks.

Yep....Mine were flare connections and i used a brake line flaring tool kit and a mandrel bender. What do you need to know? I made a set of lines from some old used crap I had lying around, when I get home i will see if I can get a picture before getting ready to head down SoCal way for the weekend.

I had some that wthe fittengs were stripped and I cut lines with tubing cutter and installed new fittings and used a tubeing flair tool that I had for brake lines and good as new and cheaper.  I have a friend that made his own and bent to fit with tubing bender for brake lines and flair tool.

.035" 1/4" SS tubing flared with tube nuts at the Parker store
.035" 1/2" tube with tiny holes drilled in it.
Tigged it all together. To connect I welded a -8 AN on one end. If I had to do it over I would just weld it straight to the header.