SoCal Jet Boats

Tech Talk => Fabrication => Topic started by: JBASHAM on April 07, 2014, 09:58:52 PM

Title: Rail kit fab
Post by: JBASHAM on April 07, 2014, 09:58:52 PM

So I'm wanting to build my own rail kit for the Bahner...

I was wondering if anybody has a template for the motor plates? Or if anyone has some plates I could make a template from?

I know I could figure it all out by mocking the motor up in the hull and taking a bunch of measurements, but I figured I'd ask first.




Sent from my iPhone using SoCalJetBoats

Title: Re: Rail kit fab
Post by: Just Electric on April 07, 2014, 10:01:23 PM

Hit  up jim Brock he has a welded up jog with a telescopic piece for the driveline alignment. I built my rail kit wasn't that hard and used a jigsaw to cut my motor plates out then used a router to bevel and clean up the edges


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Rail kit fab
Post by: H20Nut21Bahner on April 07, 2014, 10:30:54 PM

I built my rail kit that I had in my hondo. Used a basic bellhousing as a template

Sent from my SAMSUNG-SGH-I747 using SoCal Jet Boats mobile app