SoCal Jet Boats

Tech Talk => Fabrication => Topic started by: csanchez92557 on January 02, 2013, 09:04:22 PM

Title: Transom splash Gaurd
Post by: csanchez92557 on January 02, 2013, 09:04:22 PM

Hi guys I'm trying to see if anyone could give me some pointer on making a transom splash guard. Are they made of acrylic,plexiglass or lexan. I have already made a template out of cardboard. My plan was to use a 18"x 36" Dayton gas heater to heat up the area to be bent all at once rather then using a heat gun that I would have to move back and forth.....any suggestions?

Title: Re: Transom splash Gaurd
Post by: Rogers Hopeful on January 02, 2013, 09:32:05 PM

Maybe Carbon fiber?

Title: Re: Transom splash Gaurd
Post by: crewchief22 on January 03, 2013, 07:12:27 AM

Type "splash guard" into the search and it will bring up many threads with lots of information.

Here are a couple

http://www.socaljetboats.com/boat-showcase/lexan-splash-guard/msg160621/#msg160621 (http://www.socaljetboats.com/boat-showcase/lexan-splash-guard/msg160621/#msg160621)

http://www.socaljetboats.com/hulls/splash-guard-15453/msg184334/#msg184334 (http://www.socaljetboats.com/hulls/splash-guard-15453/msg184334/#msg184334)