SoCal Jet Boats
Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: sandaddict on January 25, 2007, 04:53:51 PM
-
I gotta '70 biesemier jet that needs new stringers and floor. the floor is already ripped out and somebody tried replacing one of the stringers I also need the gel coat redone from all the chips, scratches, thin spots from beaching it over the years and all that crap? any sugestions that won't kill my bank account? dont wanna spend 8000 dollars on a 2000 dollar boat yuno! O0 im scared to do it myself. fiberglass and I dont get along.
-
I know of a place in Stanton (405 and the 22) called Orange County Boat Repair which came highly recomended to me. I have yet to see his work, but the brief phone call with him impressed me with his knowlage.
I know there is a TON of boat places in Corona since its pretty much the speed boat capital of the world, but I am not familiar with any of them.
-
Try G-S marine . They do it all . Not for $800 though . (951) 272-6060 Gary is the mans name.
-beerjet-
-
Omar,
The "G" in GS marine is Greg. ;)
Chris
-
Omar,
The "G" in GS marine is Greg. ;)
Chris
I guess I would be helpful if I could at least remember the owners name :-\ It is actually a surprise to me everytime I can remeber my own name 8). It's good to have you around Chris . Thanks for the correction . :D
-beerjet-
-
hey sand man there is a guy in la habra that does great work, and is pretty reasonable the place is called PERFORMANCE FIBERGLASS it is on imperial blvd 1-2 blocks west of harbor blvd and there is a guy behind him that does xcellent boat work good luck
-
i just finished my first stringer and floor referb. it was a lot of work but i did it all myself. it turned out pretty well and i saved a ton doing all the work myself. but it took me a month of working onit after work