SoCal Jet Boats
Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: KonaGuy on July 06, 2010, 11:16:40 PM
-
I took off the railing on my boat and would like to cap the holes for now, does anyone know where I can get caps, like 3 inch in diameter?
-
You can try to use OMC ball gear plugs...Part number 908062...
You used to be able to buy a bag of 5 for like $20...Just silicone them on.
Check it out. ;)
GT
-
are we talkin bow rail or rub rail?
-
are we talkin bow rail or rub rail?
I assumed grab rail.
Here is what I am talking about.. http://www.iboats.com/Ball-Gear-Cover-for-OMC-Sterndrive-Cobra-908062-GLM-22030-Sierra/dm/cart_id.645790878--session_id.624837988--view_id.172936 (http://www.iboats.com/Ball-Gear-Cover-for-OMC-Sterndrive-Cobra-908062-GLM-22030-Sierra/dm/cart_id.645790878--session_id.624837988--view_id.172936)
GT
-
I am talking about the grab rails, every mount has the 3 holes. I thought I saw an old eliminator the other day with some but I didnt get a chance to talk to the guy or get close enough to look at them
-
Here's some stainless plugs I had Nick make for my Dads Eliminator 2 1/2 round then I had them powder coated white,Nick made a few more plugs let me know if this will work for you.
-
those definately look like like something I had in mind. Did you drill them and mount or silicon them on top? I was thinkin of drilling them and running flush stainless bolts through them. Im thinkin thats the best route for me.