SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: patha on May 13, 2010, 07:18:05 PM

Title: cracks where intake mounts
Post by: patha on May 13, 2010, 07:18:05 PM

i got 2 cracks where the intake of the jet bolts up as shown in picture below.  how should I go about repairing these?

Title: Re: cracks where intake mounts
Post by: jet boat performance on May 13, 2010, 08:39:19 PM

Pretty common and not a big concern I'd follow them out a ways and  stop drill them then grind the area back a few inches in circumferance and lay down some glass mat and lamninating resin to build and fill call if you need help Tom

heres a pic of a similar problem we repaired recently
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2FMiller%2520Tommy%2FDSC07043.jpg&hash=167508c876476a6408e4eea3b1c9ba7e55876303)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2FMiller%2520Tommy%2FDSC07053.jpg&hash=26ce6cfd9d14cab5f45c7ed0b58aa5136210a375)