SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: folsom619 on October 11, 2015, 07:59:25 PM

Title: Fiberglass scoop
Post by: folsom619 on October 11, 2015, 07:59:25 PM

I will be mounting a harwood fiberglass scoop to the scoop tray using dzus fasteners. Any tricks or advice?


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: jimpen on October 11, 2015, 08:17:33 PM

Make sure you get then line up perfect and life will be good.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: folsom619 on October 11, 2015, 08:21:54 PM

There is about an eighth of play on each side between scoop and tray, do I need to put a shim between


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: jimpen on October 11, 2015, 09:09:58 PM

Quote from: folsom619 on October 11, 2015, 08:21:54 PM

There is about an eighth of play on each side between scoop and tray, do I need to put a shim between


Sent from my iPhone using SoCal Jet Boats

. No you should be fine.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: folsom619 on October 11, 2015, 10:03:02 PM

Thanks jimpen


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: SomeThingWilder on October 12, 2015, 08:05:30 PM

Quote from: folsom619 on October 11, 2015, 10:03:02 PM

Thanks jimpen


Sent from my iPhone using SoCal Jet Boats

where did u get your tray? Single or double?

Title: Re: Fiberglass scoop
Post by: folsom619 on October 12, 2015, 08:06:51 PM

Single at jegs. 4500 series


Sent from my iPhone using SoCal Jet Boats

Title: Re: Fiberglass scoop
Post by: SomeThingWilder on October 12, 2015, 08:22:19 PM

Thanks