SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: havasuman on September 09, 2015, 10:00:55 AM

Title: gel coat repair or reshoot?
Post by: havasuman on September 09, 2015, 10:00:55 AM
hi all,
looking for a shop to reshoot or repair my eliminator  bubble deck. it was run up on the rocks and has some gouges in it down to the matting damage is on side of boat as well. i thought the right way to do this would be to pull motor flip and repair then reshoot but the ins adjuster said they will just do the work with it sitting on blocks and patch the affected areas.  2000 plus for the estimate would be given by insurance.
my question is who is the best gel coat repair in so cal, and is just a patch job vs flip n full shoot n repair of bottom/ side hull?
Title: Re: gel coat repair or reshoot?
Post by: East County Kona on September 09, 2015, 10:06:39 AM
http://www.kmgboats.com/index-2.html


Sent from my iPhone using SoCal Jet Boats
Title: Re: gel coat repair or reshoot?
Post by: East County Kona on September 09, 2015, 10:07:26 AM
I've seen KMGs work on a couple of boats, very top notch.


Sent from my iPhone using SoCal Jet Boats
Title: Re: gel coat repair or reshoot?
Post by: havasuman on September 09, 2015, 10:09:51 AM
Thanks I will call them today.


Sent from my iPad using SoCal Jet Boats
Title: Re: gel coat repair or reshoot?
Post by: DDP1084 on September 09, 2015, 11:38:52 AM
Check out performance fiberglass in la Habra they repaired a hole in the side of my boat then gel coated the whole thing they do great work and do alot if insurance work.  The owners name is John
Title: Re: gel coat repair or reshoot?
Post by: GT Jets on September 09, 2015, 12:25:59 PM
Imho, the original gel is tougher than a redo. The only reason a large area would be spayed like that is if the color was being changed. That is an awful lot of blocking and polishing to do the entire bottom. That's a $5,000+ job.

They're probably going to spray the small areas to be repaired and should be able to match really close to the original color.

How old is the boat?

I don't know of any guys down in that area, but I know of three up here in the SF Bay area.

Good luck.

GT

Sent from my SCH-I545 using SoCal Jet Boats mobile app

Title: Re: gel coat repair or reshoot?
Post by: dmacattack on September 09, 2015, 02:01:18 PM
Pats fiberglass in upland is great. Don will take care of you.
Title: Re: gel coat repair or reshoot?
Post by: havasuman on September 09, 2015, 08:44:52 PM
Thx all for the input
Hull is a 79.
I will look into la habra n upland they are
Close by.


Sent from my iPhone using SoCal Jet Boats
Title: Re: gel coat repair or reshoot?
Post by: TrollerDave on September 09, 2015, 09:33:22 PM
http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/recommend-fiberglass-shop-in-i-e-area/msg246896/?topicseen#msg246896 (http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/recommend-fiberglass-shop-in-i-e-area/msg246896/?topicseen#msg246896)

http://www.socaljetboats.com/the-no-wake-zone/does-anyone/msg265281/#msg265281 (http://www.socaljetboats.com/the-no-wake-zone/does-anyone/msg265281/#msg265281)

http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/paint-job/msg234708/#msg234708 (http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/paint-job/msg234708/#msg234708)

http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/paint-and-fiberglass-work/msg205763/#msg205763 (http://www.socaljetboats.com/gelcoat-paint-fireberglass-repair/paint-and-fiberglass-work/msg205763/#msg205763)

TRG Fiberglass -Todd (626) 991-9031
SMFPacks CMS 1.0.3 © 2026