SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: tunnels on March 14, 2017, 03:07:06 PM

Title: Grinding fiberglass
Post by: tunnels on March 14, 2017, 03:07:06 PM

Cutting out the floor and grinding out rotten glass is not as fun as fooling around with the wife! :screwy:

Title: Re: Grinding fiberglass
Post by: Cliffjumper on March 14, 2017, 04:13:05 PM

Yeah bc you don't get itchy fooling around with the wife

Sent from my SM-G930P using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Grinding fiberglass
Post by: Steveo909 on March 14, 2017, 05:51:37 PM

Quote from: Cliffjumper on March 14, 2017, 04:13:05 PM

Yeah bc you don't get itchy fooling around with the wife

Sent from my SM-G930P using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Depends on who's wife....

All joking aside I feel your pain.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Grinding fiberglass
Post by: Flusher on March 14, 2017, 06:09:29 PM

You ain't felt pain until you contaminate your wife's laundry with fiberglass dust.

Here's a little trick that helps ease the itching:

1.)  Take a cold shower
2.)  Grind a lot of baby powder all over your body
3.)  Hot shower after glass work

If you still feel itchy, rub nylon stocking to remove micro splinters.

Remember:

Don't just throw your clothes into the laundry basket.  I run them separately, twice.  Then run an empty rinse and spin cycle before running another load of laundry.