SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: coors909 on October 18, 2015, 03:43:29 PM

Title: Hole patch
Post by: coors909 on October 18, 2015, 03:43:29 PM: How should I patch these up?

Sent from SoCal Jet Boats
Title: Re: Hole patch
Post by: jyeager on October 18, 2015, 03:51:13 PM: Where exactly is that? Either way I would put a dowel in with resin then grind it down and glass from both sides

Sent from McIntyre park
Title: Re: Hole patch
Post by: coors909 on October 18, 2015, 04:29:50 PM: Quote from: jyeager on October 18, 2015, 03:51:13 PM
Where exactly is that? Either way I would put a dowel in with resin then grind it down and glass from both sides

Sent from McIntyre park

On the transom

Sent from SoCal Jet Boats
Title: Re: Hole patch
Post by: jimpen on October 18, 2015, 04:52:57 PM: Quote from: coors909 on October 18, 2015, 04:29:50 PM
On the transom

Sent from SoCal Jet Boats
. Do what Jake said I would drill it out to the next size up dowel so it is clean.

Sent from my iPhone using SoCal Jet Boats
Title: Re: Hole patch
Post by: coors909 on October 18, 2015, 06:51:11 PM: Quote from: jimpen on October 18, 2015, 04:52:57 PM
. Do what Jake said I would drill it out to the next size up dowel so it is clean.

Sent from my iPhone using SoCal Jet Boats

Thank you. I will do that. The people that had this boat did somethings nice and others half ass.

Sent from SoCal Jet Boats