I officially owned this boat for 4 days I think. The bilge and stringers and transom were butt ugly with about 50 pounds of fiberglass and resin from PepBoys and someone's garage all over the place.

I told the new owner I would grind everything down fill and wrap the stringers and paint it up. The one issue I am having is that the cold weather is not letting everything set up but so far I am pleased with the progress.

As Skip delivered it to me




Sanding and filled the holes


Wrapped and resined


1st layer or paint


Now the bummer.... that took hours and I am 1/3 done. I hope this stuff sets up well. I might have to go get a garage heater to help everything Kick...

3/4 round oak and epoxy

So, are you saying you no longer own this boat?  

I have a depsoit and they are driving from Reno saturday to pick it up.

Oh, ok.  I was wondering why you were doing all this work if you longer owned the boat.  I've got a lot of hull work to do this summer some time, when the weather warms up, glass and paint.  But, it'll be for me on my boat.     Which I'll be keeping for a long time.

If you need any tips or help let me know

How to I warm up the weather so I can get busy?   

Close the garage door, turn on heater, wait an hour!

No garage just a car port.  I'll just have to wait for spring.   

Tarp the sides...it will hold in most of the heat

tarps are cheaper! more money fo the boat!