Can you rattle can over fiberglass and resin(dry).....just a thought I am having

I expected it to be more involved

Ask Jim thats his specialty

I expected it to be more involved

Yeah we did the Fantasy bilge with Duplicolor
First i sanded , then i sanded some more and then finally i sanded more. then spray it on and resin over it.  Jim added acetone to it to thin down the resin

I am getting ready to do my Omega bilge in blue after my stringer's are done

2sav

Well, after going through my motor and pump, I'm kind of tired of working on the boat for the time being, so I'm going to rattle can the areas that I did patch until later this year when I get the energy up to take on the JORK job and also carpet and upholstery.  I've got all new gauges, steering wheel, anodized bezels and those will go on when the paint is done.  I guess you can say I'm stock piling parts (bling) now so I'll have it when I'm ready.

  Jim added acetone to it to thin down the resin
2sav

Acetone is for cleaning NOT thinning.  You use Styrene to thin with.