i broke down and bought an inexpensive air brush to play around with and eventually fix the front of forkedup, i have never done this before, so i know there are people on here who know how to do it properly, paint mixing, air pressure, technique, etc. i am hoping you will share some of your knowledge with me and help a rookie out thanks in advance for any and all help

this is what i have so far, i made a stencil and played around tonight for about 45 min
comments and critisisms are more than appreciated

Check this out...
http://smartflix.com/store/video/4075/Creating-Killer-Skullz

thanks for the link, i will probably get the video, the white is to much, but i only picked up pearl white (forkedups color) and black, so my choices are limited for now and i am using a old cardboard box to paint on

Search around that web site there are a lot of good dvds to learn from.  I got a couple on fiberglassing.  There's a lot on airbrushing.

I think you don't need any help in the skills dept.  A little schoolin' on pressure and mixing and you are gonna be fine.

got bored and cleaned the garage today, got bo ;Dred with that after about 8 beers and decided it would be a good time to play with airbrush again

well... i started at about 8, but by the time i was done it was more like 15  heinekens