SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: quick olds on April 15, 2012, 03:14:19 AM

Title: reusing rub rails
Post by: quick olds on April 15, 2012, 03:14:19 AM

Can I take a rub rail off one boat and put it on another like is it possible to rebend it or will it crack or break thanks for any info

Title: Re: reusing rub rails
Post by: Colesifer on April 15, 2012, 07:51:16 AM

i pulled mine off to make it look pretty (or better than it was insome spots) than put it back on..shouldnt be an issue..

Title: Re: reusing rub rails
Post by: quick olds on April 15, 2012, 08:09:30 AM

Cool thanks bud

Title: Re: reusing rub rails
Post by: Your Mom on April 15, 2012, 08:12:41 AM

Screws or rivets?...If rivets use a small drill bit and only remove head.

Title: Re: reusing rub rails
Post by: quick olds on April 16, 2012, 09:44:46 AM

There rivets and its rivets goin back in the guy that had it before me used screws and the top started separateing from the bottom.had to fix it now gettin ready ro out rails on from another boat