SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: 88 Baker on December 10, 2015, 12:58:54 PM

Title: Rhino liner
Post by: 88 Baker on December 10, 2015, 12:58:54 PM

Have boat gutted going to do entire inside. Was wondering if I did the bottom of the hull for sand bar pull ups n other objects in the lakes n rivers if that would affect anything n cause a drag effect ??


Sent from my iPhone using SoCal Jet Boats

Title: Re: Rhino liner
Post by: jyeager on December 10, 2015, 01:17:23 PM

Personally, doing that on the inside and outside is a bad idea. Inside is going to be hot and bad on the feet. On the bottom I would think would definitely cause drag.

Solution for the inside, flow coat or bilge coat.

Outside. Keep it off the beach...???


Sent from McIntyre Park

Title: Re: Rhino liner
Post by: 76 Bonneville on December 10, 2015, 09:47:29 PM

Adding a lot of weight to the boat.
Weight is drag

Title: Re: Rhino liner
Post by: GT Jets on December 10, 2015, 11:00:08 PM

http://www.gator-guards.com/keelshield-keel-guard/

Title: Re: Rhino liner
Post by: 88 Baker on December 11, 2015, 05:03:04 AM

Inside having snap in carpets made just want to be able to wipe it out each time I pull it out of the water with the rest of the boat. My real concern was the bottom. It is a tunnel hull but don't want the drag. So thanks Guys.


Sent from my iPhone using SoCal Jet Boats