SoCal Jet Boats

Tech Talk => Gelcoat / Paint / Fireberglass Repair => Topic started by: KonaCole on October 31, 2007, 11:42:27 AM

Title: Rub Rail
Post by: KonaCole on October 31, 2007, 11:42:27 AM

Does anyone know where I can find some rub rail that takes a rubber insert that is less than 3/4"?  The Kona has the half oval stuff on it now and it is only 1/2".  I want to change to the aluminum rail w/ rubber insert, but everything that I can find is too big.

Title: Re: Rub Rail
Post by: Marcsrollin on October 31, 2007, 12:19:37 PM

Ask Tom at Jet Boat Performance or Jim Brock.

Title: Re: Rub Rail
Post by: 76 Bonneville on October 31, 2007, 05:53:00 PM

Try L & L Marine Dist. Co. in Corona  www.llmarine.com  Just check their site and they have 5/8 in 12' lengthes. Aluminmum in blue, blk, red, gold, and clr. 

Title: Re: Rub Rail
Post by: KonaCole on November 16, 2007, 07:14:08 AM

Thanks for the info.  L+L has some 5/8" that will work perfectly!

Title: Re: Rub Rail
Post by: GAWnCA on November 17, 2007, 02:07:41 PM

Quote from: KonaCole on November 16, 2007, 07:14:08 AM

Thanks for the info.  L+L has some 5/8" that will work perfectly!

Can you include the link?  My Miller has that 1/2 rounded stuff and I'm either going to remove it and fill the holes or find something better to replace it with.

Title: Re: Rub Rail
Post by: KonaCole on November 19, 2007, 07:46:30 AM

http://www.llmarine.com/
Click on "Molding and Extrusions"
Click on "Aluminum Moldings with Inserts"
Size is .625

Title: Re: Rub Rail
Post by: GAWnCA on November 19, 2007, 03:05:31 PM

Quote from: KonaCole on November 19, 2007, 07:46:30 AM

http://www.llmarine.com/
Click on "Molding and Extrusions"
Click on "Aluminum Moldings with Inserts"
Size is .625

Thanks for the info.